TOOLS

Reduced price

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 ~~€55.81~~

Reduced price

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 ~~€225.56~~

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

Reduced price

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 ~~€128.73~~

Reduced price

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 ~~€19.03~~

Reduced price

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 ~~€50.59~~

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

Reduced price

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 ~~€224.90~~

Reduced price

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 ~~€128.73~~

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Reduced price

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 ~~€189.71~~

Pilot Seat Cutter for M8 — for 6 mm valves

Reduced price

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 ~~€89.24~~

Reduced price

SNO STUFF Deluxe Spring Tool Multi-Pack — Exhaust, Black, T-handle set

Five-piece set of exhaust spring hook tools in several lengths and hook styles for tight access and secure handling.

€42.36 ~~€57.35~~

Reduced price

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 ~~€45.47~~

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

Reduced price

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 ~~€296.31~~

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

Reduced price

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 ~~€167.55~~

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Reduced price

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 ~~€204.06~~

Reduced price

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 ~~€138.05~~

Piston Cooling Jet Pressure Tester Block — Red

Reduced price

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 ~~€96.65~~

Reduced price

FEULING OIL PUMP CORP. Tire Pressure Gauge — 0 psi - 60 psi

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€23.72 ~~€29.81~~

Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic Cat, Yellow

Reduced price
Out of Stock

SNO STUFF Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic...

Durable holder with a PVC-coated handle and precision laser-cut design for secure, comfortable use.

€38.76 ~~€52.48~~

Reduced price

SNO STUFF Clutch Holder — Ski-Doo, TRA, yellow, zinc plated

PVC-coated handle prevents scratches and adds comfort. Precision laser-cut design for accurate, reliable engagement.

€35.44 ~~€47.99~~

Reduced price
Out of Stock

SNO STUFF Clutch Holder — Yamaha, YVXC, YPZ, YXR, Yellow, zinc-plated

PVC-coated handle prevents scratches and increases comfort; precision laser-cut design for secure clutch holding.

€34.33 ~~€46.47~~

Reduced price

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 ~~€149.41~~

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

Reduced price

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 ~~€55.36~~

Reduced price

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 ~~€154.74~~

Reduced price

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester — Red

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€373.53 ~~€469.58~~

Reduced price

FEULING OIL PUMP CORP. Replacement Camplate Tool Gasket — Part 9011, Gold

Replacement gasket for Camplate tool — direct-fit replacement for part #9010.

€9.68 ~~€12.17~~

Replacement Air Regulator for Pressure Relief Testing Tool — 1/8" NPT fitting, 1/4" NPT inlet/outlet, Black

Reduced price
Out of Stock

FEULING OIL PUMP CORP. Replacement Air Regulator for Pressure Relief Testing Tool —...

Replacement regulator for Feuling pressure relief psi testing tool. 1/8" NPT fitting, 1/4" NPT inlet/outlet. Made in the USA.

€29.24 ~~€36.76~~

Reduced price
Out of Stock

SNO STUFF Clutch Holder — Brass, for Arctic Cat

Holds the stationary clutch sheave for easy assembly and disassembly. Bench-mountable or clamp in a vice. Use with a jam nut and spider tool.

€54.28 ~~€73.48~~

Secondary (Driven) Clutch Puller — Universal, Brass, fits '81-up reverse cam secondary clutches

Reduced price
Out of Stock

SNO STUFF Secondary (Driven) Clutch Puller — Universal, Brass, fits...

Universal puller for '81-up reverse cam secondary clutches with button or roller covers. Easy, reliable removal.

€61.90 ~~€83.79~~

Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and 6-tower; Comet 100C/101C/102C/108C/108EXP; Polaris P85/P90

Reduced price

SNO STUFF Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and...

Detachable bar accepts a 1/2" drive torque wrench for re-torquing; long bar for extra leverage; fits Arctco 102C/108C, Arctic Cat 9- & 6-tower, Comet 100C/101C/102C/108C/108EXP, Polaris P85/P90.

€85.77 ~~€116.12~~

Reduced price
Out of Stock

SNO STUFF Clutch Alignment Tool — Polaris, P-85, Silver

Helps keep clutch and belt aligned to avoid damage and costly repairs. Easy to use and maintains machine performance.

€32.13 ~~€43.49~~

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS