TOOLS

Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm (14")

Reduced price

MOTORSPORT PRODUCTS Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm...

Lightweight aluminum ramp for loading off-road bikes and small ATVs. Rubber-coated fingers keep the ramp in place on a tailgate.

€87.20 ~~€128.95~~

Reduced price

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 ~~€55.81~~

Reduced price

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 ~~€225.56~~

Reduced price

MOTORSPORT PRODUCTS Wheel Chock — 3.5"–6.5" tire width

Heavy-duty wedge loop stabilizes front wheel during transport. Fits 3.5"–6.5" tire widths. Includes permanent mounting hardware.

€28.69 ~~€38.84~~

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

Reduced price

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 ~~€128.73~~

Reduced price

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 ~~€19.03~~

Reduced price

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 ~~€50.59~~

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

Reduced price

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 ~~€224.90~~

Reduced price

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 ~~€128.73~~

$Pro Panel Stand — 43 cm (17\"), Red$

Reduced price

MOTORSPORT PRODUCTS Pro Panel Stand — 43 cm (17\"), Red

Heavy-duty service stand with oil- and gas-resistant rubber top, arched frame for uneven ground, and non-slip surface.

€73.00 ~~€107.95~~

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Reduced price

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 ~~€189.71~~

Pilot Seat Cutter for M8 — for 6 mm valves

Reduced price

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 ~~€89.24~~

$Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated$

Reduced price

MOTORSPORT PRODUCTS Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated

Raises the front fork legs for easy wheel removal and cleaning; fits most sport bikes and includes a rubber-coated handle for comfort.

€79.09 ~~€116.95~~

Lay-Over Stand — Silver, Off-Road & Mini Bike

Reduced price

MOTORSPORT PRODUCTS Lay-Over Stand — Silver, Off-Road & Mini Bike

Compact, foldable lay-over stand that holds the bike safely off the ground for maintenance and track use. Seven grip heights (13"–19") and notched cradle for Bark Busters™ compatibility.

€85.85 ~~€126.95~~

$SX1™ Stand — 43 cm (17\"), Blue$

Reduced price
Out of Stock

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Blue

Arched lower legs reduce rocking on uneven ground; oil- and gas-resistant rubber top; lightweight and affordable.

€41.90 ~~€61.95~~

Reduced price

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Green

Lightweight service stand with arched legs, oil- and gas-resistant rubber top, and a 3.5" drain access hole.

€39.38 ~~€53.30~~

$SX1™ Stand — 43 cm (17\"), Orange$

Reduced price

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Orange

Arched lower frame legs prevent rocking; 3.5" top hole for drain plug access; oil- and gas-resistant rubber top; very lightweight and affordable.

€42.58 ~~€62.95~~

Reduced price

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Yellow

Arched lower frame legs reduce rocking; 3.5" top hole gives drain plug access. Oil- and gas-resistant rubber top, very lightweight at 8 lb. Affordable and easy to use.

€41.90 ~~€61.95~~

Reduced price

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), White

Affordable, lightweight service stand with arched lower legs, 3.5" top hole for drain access, and oil- and gas-resistant rubber top.

€42.58 ~~€62.95~~

SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue, powder-coated

Reduced price

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue,...

Compact service stand for mini-cycles with a stable arched base, access hole for oil changes, and a secured rubber top.

€29.73 ~~€40.25~~

$SX1™ Mini Stand — 37 cm (14-1/2\") , Green$

Reduced price

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14-1/2\") , Green

Stable, economical mini-cycle service stand with arched lower legs, secured rubber top, and a top hole for drain‑plug access.

€29.06 ~~€42.95~~

Reduced price

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 ~~€45.47~~

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

Reduced price

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 ~~€296.31~~

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

Reduced price

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 ~~€167.55~~

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Reduced price

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 ~~€204.06~~

Reduced price

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 ~~€138.05~~

Piston Cooling Jet Pressure Tester Block — Red

Reduced price

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 ~~€96.65~~

Reduced price

FEULING OIL PUMP CORP. Tire Pressure Gauge — 0 psi - 60 psi

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€23.72 ~~€29.81~~

Reduced price

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 ~~€149.41~~

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

Reduced price

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 ~~€55.36~~

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS