TOOLS
Subcategories
Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.
Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.
Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.
Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.
Allows removal and installation of VVT cam bolts by securing the cam during torquing.
- 3 integrated LEDs: green, orange, red
- SAE charge port with weatherproof sealing cap
- 2x M8 eyelet terminals, 50 cm cable
- 10 A fuse protection; for 12 V lead acid batteries
Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.