HARLEY

Subcategories

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 ~~€70.03~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 ~~€70.03~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 ~~€70.03~~

$Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm (5/16\"), 146 mm (5-3/4\"), Chrome, Clear$

Reduced price

MAGNUM SHIELDING Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm...

Polished braided fuel cross-over line with crystal-clear outer jacket, polished fittings, compression-style assemblies, and two rubber seal sizes. Made in the USA.

€44.76 ~~€56.68~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts stock or custom signals to running and brake lights while retaining turn function; built-in load equalizer; plug-in connectors; made in the USA.

€95.63 ~~€141.43~~

Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style connector

Reduced price

BADLANDS Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style...

Converts stock or custom turn signals into running and brake lights while preserving turn-signal operation; built-in load equalizer and plug-in connectors for easy installation on select models.

€95.63 ~~€141.43~~

Reduced price

BADLANDS Illuminator Pro III Harley — 12V, 10A, Hard Wire

Compact control module for run, brake and turn lights. Compatible with LED, halogen and incandescent bulbs.

€95.63 ~~€141.43~~

Plug-In Style Turn Signal Load Equalizer™ III — 12V

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Solid-state waterproof plug-in equalizer that stops erratic blinking and works with most custom halogen and LED signals; one module per pair.

€66.58 ~~€83.70~~

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM Style

Solid-state, waterproof plug-in equalizer that eliminates erratic blinking and works with OEM alarm systems (TSSM) and turn signal modules (TSM). One module per pair.

€66.58 ~~€83.70~~

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Plug-and-play sealed load equalizer that stops erratic blink rates; one module required per pair of signals.

€80.09 ~~€100.69~~

Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector, Black

Reduced price

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector,...

Turns stock or custom turn signals into running and brake lights while preserving turn signal function. Built-in load equalizer, plug-in installation, made in the USA.

€97.11 ~~€122.09~~

Auto-Canceling Turn Signal Module — 12V, 8-pin Deutsch connector, Black

Reduced price

BADLANDS Auto-Canceling Turn Signal Module — 12V, 8-pin Deutsch...

Plug-and-play auto-canceling turn signal module with built-in emergency flasher and load equalizer; fits many 1994–2000 models. Made in the USA.

€87.69 ~~€110.24~~

Designer Series Front Lower Brake Line Kit — Dual-disc, without ABS, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Front Lower Brake Line Kit — Dual-disc,...

Direct-fit front lower brake line kit with PTFE tubing, Kevlar aramid reinforcement and AN-3 fittings for simplified installation; compatible with ABS and non-ABS systems.

€114.08 ~~€144.45~~

Run, Brake and Turn Signal Module — 12V, 8 pins, OEM style

Reduced price

BADLANDS Run, Brake and Turn Signal Module — 12V, 8 pins, OEM style

Adds running and brake lights to stock or custom turn signals while preserving turn signal function. Plug-in connectors and simple instructions for select models. Made in the USA.

€114.89 ~~€144.42~~

Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10 mm 180° banjo, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10...

Superior two-piece design with direct-fit lower assembly
All-brazed manifold for leak-free, clean appearance
PTFE inner tubing with aramid braid reduces expansion
AN-3 fittings for straightforward installation

€42.92 ~~€54.35~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 23" length, 10 mm banjo

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece braided brake line kit with brazed manifold construction and crystal-clear outer jacket. AN-3 connections for easy installation. Made in the U.S.A. For certain models, one upper and lower kit is required — two kits per bike.

€51.32 ~~€64.98~~

Reduced price

BADLANDS Hard-Wire CAN Bus Load Equalizer — 12V

Stops erratic front turn-signal blinking. Compatible with halogen and LED front signals, solid-state waterproof module, parade-safe with no heat, works with OEM alarm/turn-signal modules, made in the USA.

€56.47 ~~€70.99~~

Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style connector

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style...

Solid-state, waterproof plug-in module that eliminates erratic blinking on self-canceling turn signals. One module required per signal pair.

€66.33 ~~€83.39~~

Designer Series Braided Non-ABS Front Brake Line Kit — 25" (63.5 cm), 10 mm 90° banjo, Chrome Sterling Chromite II

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 25"...

Two-piece braided front brake line kit for non-ABS systems with brazed manifold, PTFE inner tubing reinforced with aramid, and AN-3 fittings. Made in the U.S.A.

€54.42 ~~€68.91~~

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Eliminates erratic blinking; plug‑in module for use with OEM alarm/TSM; solid-state sealed design; one module per signal pair.

€79.78 ~~€100.30~~

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM Style

Solid-state waterproof module that eliminates erratic blinking for custom and OEM turn signals. One module per pair.

€79.78 ~~€100.30~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 27", Chrome, 10 mm 90° banjo fitting

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Braided front upper brake line kit for non-ABS models. Two-piece design with brazed manifold and crystal-clear outer jacket. One upper + lower kit required; two kits per bike.

€53.75 ~~€68.05~~

Reduced price

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Plugs into OEM wiring to eliminate hyperflash and erratic turn-signal blinking; waterproof solid-state module. One module per pair.

€79.78 ~~€100.30~~

Reduced price

BADLANDS Brake Light Eliminator — Black, Blue

Separates running and brake lights from flashing turn signals; includes rear fender harness to replace stock wiring.

€122.84 ~~€154.43~~

Sterling Chromite II® Designer Handlebar Installation Kit — Fits 18"–20" handlebars, Ape hanger, Chrome

Reduced price

MAGNUM SHIELDING Sterling Chromite II® Designer Handlebar Installation Kit —...

Complete kit with braided cables and PTFE brake lines; includes all necessary hardware and meets DOT specifications.

€478.34 ~~€605.67~~

Sterling Chromite II® Designer Handlebar Installation Kit — Ape hanger, 38 cm–43 cm (15"–17"), Chrome clear-coated

Reduced price

MAGNUM SHIELDING Sterling Chromite II® Designer Handlebar Installation Kit —...

Complete kit with matching Sterling Chromite II® braided cables and brake lines; includes throttle, clutch and brake components, fittings, copper crush washers, hardware and switch wiring; PTFE-lined, aramid-reinforced brake hoses; DOT FMVSS-106 compliant; assembled in the USA.

€444.77 ~~€563.16~~

Sterling Chromite II® Designer Handlebar Installation Kit — Ape hanger fit, 38–43 cm (15"–17"), Chrome, Clear-coated

Reduced price

MAGNUM SHIELDING Sterling Chromite II® Designer Handlebar Installation Kit —...

Complete installation kit with matching braided cables and brake lines. Includes throttle and idle cables, clutch or hydraulic clutch line, brake lines, hardware, washers and switch wiring. DOT-compliant and assembled in the USA.

€104.00 ~~€131.81~~

Showing 1-30 of 2460 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY