Engine Tools

Tappet Screen Plug Tool — for big twin (excl. twin cam), slotted screw tappet screen cover, black

Reduced price

MOTION PRO Tappet Screen Plug Tool — for big twin (excl. twin cam),...

Removes and installs tappet oil filter screen plugs for big twin models (excl. twin cam); fits a 7/16" combination wrench.

€7.95 ~~€10.76~~

Belt Tension Gauge — 10 lb spec, Black, Silver

Reduced price

MOTION PRO Belt Tension Gauge — 10 lb spec, Black, Silver

Compact belt tension gauge with graduated scale and L-shaped pad; measures to a 10 lb specification.

€20.89 ~~€28.28~~

Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black oxide

Reduced price

MOTION PRO Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black...

Precision right-hand internal thread puller for safe removal of flywheels or rotors. Heat treated, durable finish, lifetime limited warranty.

€29.25 ~~€39.60~~

Reduced price

MOTION PRO Rocker Box Wrench — Rocker Box Cover, Black

Designed to reach 3/16" hex screws on the rocker boxes of Big Twin, Sportster and Buell models. Vinyl-covered area reduces the chance of surface damage. 3/8" drive for torque-tool use.

€14.20 ~~€19.23~~

Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length, 2-stroke, Silver

Reduced price

MOTION PRO Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length,...

Enables use of water-cooled 2-stroke timing kits on air-cooled engines with 14 mm spark plugs. Includes extended thread adapter and dial indicator extension. Not compatible with Yamaha RD two-stroke twins while engine is in frame.

€11.69 ~~€15.83~~

Reduced price

MOTION PRO Timing Kit — Water Cooled, 2-Stroke, Silver

Dial indicator set with extensions and a 14 mm spark plug thread adapter; 1-1/2" gauge face for accurate timing checks.

€134.61 ~~€182.25~~

Reduced price

MOTION PRO Dual Drive T-Handle Set — 4, 5, 6, 8 mm, 171.5 mm

Four-piece T-handle set for quick installation and removal; ball-end allows up to 25° access.

€44.18 ~~€59.81~~

Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel Pewter

Reduced price

MOTION PRO Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel...

T-handle hex for quick tightening and loosening; ball end reaches Allen-head bolts up to 25°.

€10.43 ~~€14.13~~

Reduced price

MOTION PRO Dual-Drive Allen T-Handle — 6 mm, 171.5 mm

Ball-end T-handle Allen key for quick shaft fastener installation and up to 25° access.

€9.60 ~~€13.01~~

Reduced price

MOTION PRO Wheel Bearing Remover — Split collet, black

Heat treated for long life; removes wheel bearings cleanly and safely for maintenance and shop use.

€7.11 ~~€9.63~~

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

Reduced price

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 ~~€45.25~~

Reduced price

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 ~~€9.63~~

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Reduced price

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 ~~€29.66~~

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

Reduced price

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 ~~€18.68~~

Gear Jammer™ — Primary gear, Blue anodized

Reduced price

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 ~~€16.96~~

Wall Bracket for T-Handle Rack — Chrome, Silver

Reduced price

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 ~~€22.61~~

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

Reduced price

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 ~~€39.17~~

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

Reduced price

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 ~~€29.42~~

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

Reduced price

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 ~~€29.18~~

Reduced price

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 ~~€30.55~~

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

Reduced price

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 ~~€31.38~~

Reduced price

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 ~~€13.76~~

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

Reduced price

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 ~~€55.43~~

Reduced price

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.