Camshafts

Reduced price

S&S CYCLE 640 Cam — 640 Series grind, Gear

High-performance camshaft for large-displacement and select mid-size engines; designed for hydraulic tappets. Installer must check clearances and use high-lift springs.

€205.82 ~~€258.74~~

Reduced price

S&S CYCLE Cam Bearing Retention Plate — 33-5212

Durable retention plate for gear-drive cam systems. Recommended for use with gear-drive cams. Made in the U.S.A.

€10.28 ~~€12.93~~

Reduced price

S&S CYCLE 510G Camshaft Kit — 510 Series grind, Intake 238° / Exhaust 252°

Bolt-in camshaft kit for 88", 95", 96" and 103" engines; includes cam drive gear kit and installation hardware. Made in USA.

€747.05 ~~€939.14~~

Reduced price

S&S CYCLE 510C Camshaft Kit — 510 Series grind, Chain

Complete 510C camshaft kit with cams, gaskets and hardware; bolt-in fit for 88", 95", 96" and 103" CID engines; stock pushrods and springs acceptable; made in the USA.

€329.33 ~~€414.01~~

570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

Reduced price

S&S CYCLE 570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

Complete camshaft kit for 88"–103" CID engines with 9:1–10:1 compression. Includes camshafts, gaskets, bearings, retaining ring, o-ring, thread lock and instructions. Strongest from 3200–3700 rpm. Requires high-lift valve springs; installer must verify coil bind and clearances. Made in the USA.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 585C Chain Drive Camshaft Kit — 585 Series grind

Mid-range focused cam kit for 88"–107" big-twin engines. Strongest 3500–6000 rpm (smaller engines) and 2500–5000 rpm (larger engines). Made in the USA. Installer must check coil bind and clearances.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series, chain

Reduces crank compression for easier starting, then returns to full compression for normal performance. Bolt-in for 88"–106" Touring bikes with slip-on mufflers. Improves low-end and midrange torque. Not for OEM compression releases or compression ratios ≥10.0:1.

€425.73 ~~€535.20~~

Reduced price

S&S CYCLE 583 Easy Start Camshaft Kit — 583 Series grind, S&S Cycle

Easy-start camshaft kit for Big Twin engines; optimized for Softail and Dyna, bolt-in and made in the USA.

€425.73 ~~€535.20~~

583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°, Intake 204°

Reduced price

S&S CYCLE 583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°,...

Easy-start camshaft kit for Big Twin; optimized for Softail and Dyna, bolt-in, strong low-end torque; includes hardware; made in USA.

€843.44 ~~€1,060.33~~

Reduced price

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear

Reduces cranking compression for easier starts; bolt-in kit for 88–124 CID engines; increases power from 3,000 rpm and holds to redline; includes complete hardware; not for OEM compression release models; Made in USA.

€843.44 ~~€1,060.33~~

Reduced price

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series grind, chain

Reduces crank compression at startup for easier starting, then returns to full compression; improves low-end and midrange torque for Touring models.

€466.59 ~~€586.34~~

Reduced price

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Reduces crank compression for easier starts; bolt-in kit for 88"/95"/103" engines, power gain 3200–5700 rpm. Includes camshafts, gasket, bearings, retaining ring, o-ring, thread lock and instructions. Not for models with OEM compression releases.

€370.77 ~~€466.11~~

Reduced price

S&S CYCLE 583 Easy Start Camshaft Kit — 583 series grind, chain

Bolt-in camshaft kit that eases starting by reducing initial crank compression; delivers strong low-end torque for Softail and Dyna. Includes cams and installation hardware; made in the USA.

€461.14 ~~€579.48~~

Reduced price

S&S CYCLE 551C Chain Drive Camshaft Kit — 551 Series, Chain

Bolt-in camshaft kit for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque, strongest at 1,000–4,000 rpm. For '06 Dyna and '07-'17 Twin Cam hydraulic tensioner chain drive systems. Not recommended for 10:1+ compression.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 510C Camshaft Kit — 510 Series, Chain

Complete 510C camshaft kit with cams, gaskets, bearings and instructions. Bolt‑in for 88", 95", 96" and 103" CID engines (compression < 9.7:1). Stock pushrods and springs acceptable. Strongest 3,000–5,500 RPM. Made in USA.

€329.33 ~~€414.01~~

509C Chain Drive Camshaft Kit — Chain drive, for 88 CID, '00–'06 Twin Cam

Reduced price

S&S CYCLE 509C Chain Drive Camshaft Kit — Chain drive, for 88 CID,...

Bolt-in 509C cams deliver excellent low/mid torque with strongest pull at 1000–4500 RPM. Installer must verify clearances; made in USA.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 509G Gear Drive Camshaft Kit — 88 ci

Bolt-in 509G gear drive cam kit for 88 ci engines. Includes cams, gears, bearings and gaskets. Requires professional installation and clearance checks.

€747.05 ~~€939.14~~

640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines, 10.5:1–11.5:1 compression, 3,000–6,000 rpm

Reduced price

S&S CYCLE 640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines,...

Reduces compression for easier starting; retracts at rpm for full compression. For 95"–110" engines, 10.5:1–11.5:1. Installer checks required.

€490.59 ~~€616.73~~

Reduced price

S&S CYCLE Camshaft Kit with Inner Gears — 510 Series grind, Gear type

Complete camshaft kit with inner and outer gears plus installation hardware: gearcover gasket, bearings, oil passage block-off kit, retaining ring, o-ring and instructions.

€384.07 ~~€482.83~~

Reduced price

S&S CYCLE H-Grind Camshaft — Gear, for '48–'84 Big Twins, fits 74" and 80"

OEM-spec hydraulic H-Grind camshaft, reproduces stock '48–'84 Big Twins cams; ideal for 74" and 80" restorations. Compatible with generator and alternator engines.

€200.80 ~~€252.43~~

Reduced price

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 ~~€939.14~~

Reduced price

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 ~~€414.01~~

Reduced price

S&S CYCLE 640 Easy Start Camshaft Kit — 95/96/103/110 cu in, 10.5:1–11.5:1

Reduces starting compression for easier starts, then fully retracts at higher rpm for full performance. For 95/96/103/110 engines, 10.5:1–11.5:1. Not for models with OEM compression releases. High-lift springs and adjustable pushrods required.

€370.77 ~~€466.11~~

Reduced price

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 ~~€535.20~~

Reduced price

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€393.94 ~~€495.24~~

Reduced price

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 ~~€1,060.33~~

Reduced price

S&S CYCLE 635 H.O. Gear Drive Camshaft Kit — Gear drive, Raw finish

High‑lift camshaft kit for modified engines 106"+ displacement; increases accuracy by removing chain lash; requires professional installation and press.

€661.56 ~~€831.67~~

Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit — S&S CYCLE Kit, PN 106-6027

Reduced price

S&S CYCLE Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit...

Quality camshaft kit for 1954–1984 Big Twin models; higher lift and improved valve timing. Quiet hydraulic operation when used with hydraulic conversion kits.

€173.59 ~~€218.23~~

Reduced price

S&S CYCLE Idler Gear Shim — 1.37 mm (0.054 in)

Precision shims for circuit breaker drive and idler gear assemblies. Sold as a set.

€6.58 ~~€8.27~~

Camshafts

Contact us

Products

Our company