Exhaust

Reduced price

DRAG SPECIALTIES O2 Sensor Plug — 18 mm x 1.5 mm thread

Seals unused O2 sensor ports. Sold individually. Made in the U.S.A.

€4.43 ~~€6.50~~

Reduced price

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 18 mm x 1.5 mm thread

Weld-in bungs for installing O2 sensors in exhaust systems.

€12.80 ~~€18.77~~

Reduced price

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 12 mm, 1.25 mm pitch, pair

Weld-in style O2 sensor bungs for installing oxygen sensors in exhaust systems.

€14.33 ~~€21.02~~

Reduced price

DRAG SPECIALTIES O2 Sensor Plug — 12 mm, 1.25 mm thread pitch

Seals unused O2 sensor ports; sold individually.

€4.43 ~~€6.50~~

Reduced price

DRAG SPECIALTIES O2 Sensor Bung Adapter Kit — adapts 18 mm - 12 mm

Converts 18 mm exhaust bungs to 12 mm; includes two adapters, extension wire and connectors.

€26.32 ~~€35.63~~

Reduced price

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 7.6 m (25'), 25.4 mm (1"), beige

Fiberglass exhaust wrap kit rated for high temperatures; includes four 14" stainless steel locking ties. Made in the U.S.A.

€30.86 ~~€41.78~~

Exhaust Heat Wrap Kit — 25' (7.6 m), 1" (25.4 mm), Black

Reduced price

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25' (7.6 m), 1" (25.4 mm), Black

High-temperature fiberglass exhaust wrap rated 1,200°F/2,000°F with four 14" stainless steel locking ties; made in the USA.

€32.99 ~~€44.66~~

Reduced price

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25', 2" tan

Wraps pipes and mufflers to contain heat. Includes four 14" stainless steel locking ties. Made in the U.S.A.

€69.20 ~~€93.69~~

Exhaust Heat Wrap Kit — 25' length, 2" width, Black

Reduced price

DRAG SPECIALTIES Exhaust Heat Wrap Kit — 25' length, 2" width, Black

High-temperature fiberglass exhaust wrap kit with four stainless steel locking ties; replacement ties sold separately.

€43.95 ~~€59.51~~

Reduced price

DRAG SPECIALTIES Stainless Steel Cable Tie — 14" (35.5 cm), 5 Pack

Heavy-duty cable tie with ball bearing and barb fastening that locks tightly for extra-strength applications. Made in the U.S.A.

€15.13 ~~€20.48~~

Reduced price

DRAG SPECIALTIES Stainless Steel Cable Tie — 20.5 cm (8"), 5 pack

Ball bearing and barb fastening assembly; locks tightly and will not slip. Great for high-temperature areas. Made in the U.S.A.

€12.70 ~~€17.20~~

Reduced price

DRAG SPECIALTIES Worm Clamp — 31.8–57.2 mm, Stainless Steel, 4 Pack

Narrow design with a low-profile head. Secures exhaust heat wraps and other high-temperature applications. Made in the U.S.A.

€16.89 ~~€22.86~~

Reduced price

DRAG SPECIALTIES Worm Clamp — 57.2–82.6 mm, 4 Pack

Narrow, low-profile design secures heat wraps and performs in extreme temperatures. Made in the U.S.A.

€17.45 ~~€23.63~~

Reduced price

DRAG SPECIALTIES Weld-in O2 Sensor Bungs — 12 mm, 1.25 mm pitch, 45°

Weld-in bungs for installing O2 sensors in exhaust systems.

Weld-in style for permanent, secure mounting.

€24.59 ~~€36.07~~

Muffler Packing — 40.5 cm (16") length, 28 cm (11") width

Reduced price

DRAG SPECIALTIES Muffler Packing — 40.5 cm (16") length, 28 cm (11") width

High-temperature muffler packing rated to 1,200°F. Split-design for double use. Made in the U.S.A.

€17.57 ~~€23.78~~

Reduced price

DRAG SPECIALTIES Rubber Muffler Mounts — Black

High-quality replacement component. Support kit and replacement bracket sold separately. Sold in pairs.

€5.09 ~~€6.89~~

Reduced price

DRAG SPECIALTIES Heavy-Duty Exhaust Flange Kit — Polished

Includes two flanges and two retaining rings; thicker flanges reduce distortion. Replacement retaining rings sold separately.

€27.80 ~~€37.63~~

Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8") length

Reduced price

DRAG SPECIALTIES Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8")...

Reduces exhaust noise and improves backpressure. Fiberglass-wrapped construction; may require drilling for installation.

€11.85 ~~€16.05~~

Reduced price

DRAG SPECIALTIES Exhaust Bracket Tab — U-08-0223, Zinc-plated

Bracket that secures the rear header pipe to the starter bracket exhaust mount for stable support and reduced vibration.

€5.55 ~~€7.51~~

Reduced price

DRAG SPECIALTIES Rear Exhaust Pipe Bracket — Rear, Chrome

High-quality replacement component with zinc-plated steel construction for corrosion resistance.

€19.61 ~~€26.55~~

Reduced price

DRAG SPECIALTIES Woven Basalt Exhaust Wrap Kit — 7.6 m (25'), 50.8 mm (2"), bronze

High-temperature woven basalt exhaust wrap rated 1800°F continuous / 2500°F intermittent. Includes four 14" stainless steel ball-bearing, barb-locking ties; glossy bronze finish; made in the U.S.A.

€49.02 ~~€66.37~~

Reduced price

DRAG SPECIALTIES O2 Port Bushing Adapter — Adapts 18 mm to 12 mm

Adapter bushing for oxygen sensor ports that enables use of a smaller sensor. Precision machined for reliable fitment.

€6.15 ~~€9.02~~

Reduced price

DRAG SPECIALTIES FXR Exhaust Mount Front Bracket — Chrome

Front exhaust bracket for FXR frames; suited for custom frame applications.

€13.00 ~~€17.60~~

Reduced price

DRAG SPECIALTIES Replacement Exhaust Support Bracket — Exhaust

Replacement support for secure muffler alignment and reduced vibration. Hardware sold separately.

€18.94 ~~€27.78~~

Reduced price

GARDNER-WESTCOTT Exhaust Stud — 5/16"-18 / 5/16"-24 x 1-11/16" stud, Black

Replacement exhaust stud with 5/16"-18 and 5/16"-24 threads, 1-11/16" length. Made in the U.S.A.

€23.64 ~~€29.71~~

Reduced price

DRAG SPECIALTIES Replacement Baffle — 44.5 mm (1-3/4"), steel

Direct-fit replacement baffle for drag-style exhaust pipes. Easy installation and reliable performance.

€5.44 ~~€7.37~~

Reduced price

DRAG SPECIALTIES Muffler Clamps — Chrome

Durable muffler clamps that meet or exceed OEM specifications. Available in matched sets.

€20.53 ~~€27.80~~

Exhaust Hanger Bracket — 12 cm (4.75 in), 1/8 in thickness, Chrome

Reduced price

DRAG SPECIALTIES Exhaust Hanger Bracket — 12 cm (4.75 in), 1/8 in thickness,...

Securely mounts exhaust components and reduces vibration for smoother operation. Easy to install.

€6.58 ~~€8.91~~

Reduced price

DRAG SPECIALTIES Heat Shields — 1-3/4" (44.5 mm) inside diameter, chrome

Covers for aftermarket staggered dual pipes that conceal the crossover tube and allow clean pipe covers without cutouts.

€50.30 ~~€68.09~~

Reduced price

DRAG SPECIALTIES Right-Side Chrome Heat Shield — 22", Dresser

Lower-side heat shield sold with hardware; fits stock exhaust systems for easy bolt-on installation.

€29.26 ~~€39.62~~

Exhaust

Contact us

Products

Our company