Lighting

Headlight Mount Extension Hardware — Headlight extension, black, kit

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Headlight extension,...

Moves headlight forward for Memphis Shades fairings and windshields. Bezels may require trimming; instructions included.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black, MEB9885

Moves the front lamp forward to allow installation of most aftermarket fairings and windshields. Bezel trimming may be required; instructions and hardware are included.

€24.52 ~~€30.83~~

2" LED Driving Light Kit w/ 1-1/4" Clamps — 1-1/4" clamp (32 mm), 12V, 30W

Reduced price

RIVCO PRODUCTS 2" LED Driving Light Kit w/ 1-1/4" Clamps — 1-1/4" clamp (32...

Compact clamp-mount LED driving light kit for engine guards, handlebars, fairings, or light bars.

Adjustable swivel mounts and included hardware make installation straightforward; sold as a pair.

€278.53 ~~€350.16~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Headlight, Polished

Moves the headlight forward for fairing and windshield fitment; trimming instructions included.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black

Moves the headlight forward to accommodate fairings and windshields; bezel trimming may be required; precision machined for a reliable fit.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black, billet aluminum

Moves the headlight forward for Memphis Shades fairing and windshield installation; instructions included. Bezels may require trimming.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Billet aluminum, Black

Kit to move the headlight forward for fairing and windshield installations; includes trimming instructions for bezel clearance.

€24.52 ~~€30.83~~

Reduced price

RIVCO PRODUCTS Illuminati LED Headlight Assembly — 146 mm (5-3/4"), Black

High-output LED headlight: 2400 lm low / 3200 lm high, 6500K color temperature, DOT/SAE compliant.

€226.30 ~~€284.49~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Kit, Black

Moves the headlight forward to fit aftermarket fairings and windshields; bezels may require trimming; precision-machined for strength.

€32.43 ~~€40.77~~

Reduced price

MEMPHIS SHADES HD Dual Headlight Extension Block — Black

Extension block for dual headlights compatible with Road Warrior fairing part # 2330-0204; direct-fit solution for improved clearance and alignment.

€24.30 ~~€30.54~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — MEB9882, Black

Moves the headlight forward for Memphis Shades fairing and windshield installation. Includes trimming instructions and precision-machined construction. Supplied as a kit.

€24.52 ~~€30.83~~

Headlight Trim Ring/Shroud Kit — 5-3/4", Chrome, fits Road Warrior Fairing

Reduced price

MEMPHIS SHADES HD Headlight Trim Ring/Shroud Kit — 5-3/4", Chrome, fits Road...

Includes a 5-3/4" trim ring and a paintable ABS shroud; required for certain aftermarket fairings.

€32.74 ~~€41.16~~

Mo Flasher/Wave Digital Flasher Relay — 5–18V, 9.5 mm

Reduced price

MOTOGADGET Mo Flasher/Wave Digital Flasher Relay — 5–18V, 9.5 mm

Replaces conventional flasher relays while using only two cables. Compact, waterproof digital relay with a constant flashing rate for LEDs and micro-blinkers; operates on 5–18V.

€29.80 ~~€32.77~~

Mo Flasher/Wave Digital Flasher Relays — 9.5 mm, mo-WAVE, Digital

Reduced price

MOTOGADGET Mo Flasher/Wave Digital Flasher Relays — 9.5 mm, mo-WAVE, Digital

Replaces conventional flasher relays using only two cables. Fits tight installations, routes through handlebars or frame. 5–18V operation, water and short-circuit proof. No load resistors required. Immediate, lossless response and automatic overload protection.

€43.36 ~~€47.70~~

Mo-Can Signal Converter — 72 mm L, 42 mm H, 26.5 mm D, Connector H-D DYN

Reduced price

MOTOGADGET Mo-Can Signal Converter — 72 mm L, 42 mm H, 26.5 mm D,...

Connect compatible instruments and indicator lights to the stock wiring harness without soldering or crimping. Includes mounting hardware and cable accessories. Compact 72 × 42 × 26.5 mm.

€75.92 ~~€133.61~~

Reduced price

MOTOGADGET Mo-Can Signal Converter — H-D (Deutsch)

Connect Motogadget instruments and indicator lights to the stock wiring harness without soldering or crimping; includes mounting hardware and cable end sleeves.

€121.47 ~~€133.61~~

Reduced price

MOTOGADGET mo-RELAY + Push Button Flasher Relay — 19 mm, Handlebar

Load-independent digital flasher with electronic push-button controls. Four modes: lane change, turn, continuous, hazard. 5–18 V, water-tight and vibration-resistant.

€67.99 ~~€74.79~~

Reduced price

MOTOGADGET Mo-Button For Mo-Unit Digital Control Center — 12 mm, handlebar

Compact control button that pairs with the m-Unit to centralize handlebar wiring and transmit switch signals over a thin cable.

€79.67 ~~€87.64~~

Turn Signal Relocation Kit — Black, Pair

Reduced price

MEMPHIS SHADES HD Turn Signal Relocation Kit — Black, Pair

Allows relocation of turn signals for fairing installations; includes wire connector parts and injection-molded construction. Made in USA.

€15.05 ~~€18.91~~

Reduced price

MOTOGADGET mo.UNIT Blue — 101 x 61 x 28 mm, internal mount

Keyless control center with encrypted Bluetooth LE, m.ride app support, real-time audio fault messages, adjustable alarm and compact design.

€304.82 ~~€335.29~~

Reduced price

MEMPHIS SHADES HD Turn Signal Relocation Kit — Black

Relocates turn signals and includes all necessary hardware for a clean installation.

€24.52 ~~€30.83~~

mo-BLAZE Ice Turn Signal — 20.5 mm, Anodized Black

Reduced price

MOTOGADGET mo-BLAZE Ice Turn Signal — 20.5 mm, Anodized Black

Compact LED turn signal featuring patent-pending TranzLight-Technology® and IntensiLED® for nearly 180° visibility; ECE approved.

€37.43 ~~€41.17~~

mo-BLAZE Pin Turn Signals — Anodized Black

Reduced price

MOTOGADGET mo-BLAZE Pin Turn Signals — Anodized Black

Compact, low-profile direction indicators with TranzLight-Technology® and IntensiLED® LEDs. 38.5 mm (with thread), 16 mm diameter; includes M8 hardware and 100 cm cable. ECE approved.

€37.43 ~~€41.18~~

mo-BLAZE Pin Turn Signals — 12 V, 38.5 mm length (with thread), 16 mm diameter, anodized black

Reduced price

MOTOGADGET mo-BLAZE Pin Turn Signals — 12 V, 38.5 mm length (with...

Compact bolt-on mini turn signals with TranzLight-Technology® and IntensiLED®; ECE approved for front and rear; includes M8 hardware and 100 cm cable.

€37.43 ~~€41.18~~

MO Blaze — 12V, M8 thread, rear, anodized black, red

Reduced price

MOTOGADGET MO Blaze — 12V, M8 thread, rear, anodized black, red

Compact, ECE-approved taillight/brake light with lateral beam for improved visibility; includes M8 nut and push-lock connectors. Order two for a rear pair.

€45.07 ~~€49.58~~

MO Blaze — 12 V, rear, red, polished aluminum

Reduced price

MOTOGADGET MO Blaze — 12 V, rear, red, polished aluminum

Extremely compact taillight/brake combo with ECE approval, high-power LED output, M8 thread and included connectors; sold each — order two for a rear pair.