Lighting

Headlight Isolator Mounts — 1/4" (6.4 mm), 3-Pack

Reduced price

CYCLE VISIONS Headlight Isolator Mounts — 1/4" (6.4 mm), 3-Pack

Replacement rubber insulators with 1/4"-20 studs that reduce shock and extend headlight life.

€15.83 ~~€19.90~~

Rear Turn Signal Cover Plates — Rear, Chrome

Reduced price

CYCLE VISIONS Rear Turn Signal Cover Plates — Rear, Chrome

Fill the hole left when removing rear turn signals for a clean, factory appearance. Simple bolt-on fit and includes mounting hardware.

€30.55 ~~€38.40~~

Reduced price

CYCLE VISIONS Rear Turn Signal Cover Plates — Black, Pair

Conceals the hole in the rear fender strut cover after removing the turn signals; bolt-on installation.

€30.55 ~~€38.40~~

In-Close License Plate Holder — 4" x 7", side mount, chrome

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount, chrome

Billet aluminum construction with no visible fasteners; most tucked-in holder on the market; mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL; accepts most 4" x 7" plates; made in the U.S.A.; not for use with shock relocation kits or saddlebags.

€155.39 ~~€195.34~~

In-Close License Plate Holder — 4" x 7" plate, side mount for FXST/FLST and FXD/XL, black

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7" plate, side mount for...

Billet aluminum, most tucked-in holder on the market; mounts off the axle for FXST/FLST and off the axle adjuster for FXD/XL. Accepts most 4" x 7" plates. Made in the U.S.A.

€189.55 ~~€238.28~~

In-Close License Plate Holder — 4" x 7", side mount, black

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount, black

Billet aluminum side-mount license plate holder; accepts most 4" x 7" plates. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Not compatible with shock relocation kits or saddlebags.

€144.94 ~~€280.33~~

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" H, 7" L, Side mount, Chrome

Most tucked-in license plate holder available. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Accepts most 4" x 7" plates. Not for use with shock relocation kits or saddlebags. Made in the U.S.A.

€208.49 ~~€262.11~~

Curved License Mount with Frame — Harley-Davidson®, rear mount, black, curved frame, LED signals

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley-Davidson®, rear...

Low-profile curved license mount with integrated signal frame for rear installation. Not DOT compliant in all areas; hardwire required. CAN bus models may need a reflash.

€254.50 ~~€319.94~~

3-Hole Mounted LED Lighted License Plate Frame — Black

Reduced price

CYCLE VISIONS 3-Hole Mounted LED Lighted License Plate Frame — Black

Curved 3-hole 16-gauge steel back plate with powder-coated finish. LED lights require hard wiring. Not DOT approved; DOT certification valid only in USA.

€103.88 ~~€130.59~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Horizontal, black powder coat

Low-profile curved license plate holder with a durable powdercoat finish. Does not include license plate frame.

€112.17 ~~€141.01~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Black steel, horizontal

Heavy-gauge curved holder with powdercoat finish. Does not include license plate frame. Easy to mount with common hardware.

€112.17 ~~€141.01~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Black, Steel

Low-profile curved mount made from 10-gauge steel with a black powdercoat finish. Does not include license plate frame.

€112.17 ~~€141.01~~

Lucifer Lights — 12V, 7/8" dia., 1/2" H, red

Reduced price

CYCLE VISIONS Lucifer Lights — 12V, 7/8" dia., 1/2" H, red

Super bright two-function LED marker light. Measures .825" D x 1/2" H; requires 5/16" hole for mounting; 28" wire length; may need load equalizer.

€68.08 ~~€85.59~~

Lucifer Lights — 20 mm dia, 12.7 mm length, 5/16" mounting hole, 12 V, red

Reduced price

CYCLE VISIONS Lucifer Lights — 20 mm dia, 12.7 mm length, 5/16" mounting...

Super bright two-function LED marker lights. Compact .825" diameter x 1/2" height. Requires 5/16" mounting hole; 28" wire. Sold as a pair.

€74.89 ~~€94.15~~

Nylon License Plate Fasteners — 100 pack, white

Reduced price

PARTS UNLIMITED Nylon License Plate Fasteners — 100 pack, white

Durable nylon fasteners that resist corrosion and stay secure. Install and remove by hand.

€30.08 ~~€40.72~~

Eliminator™ Taillight — 4" x 7", chrome housing

Reduced price
Out of Stock

CYCLE VISIONS Eliminator™ Taillight — 4" x 7", chrome housing

Neatly replaces taillight, turn signals and 4" x 7" license plate mount. LED lights, plug-and-play harness and built-in run/turn/brake controller for a clean, integrated installation.

€310.15 ~~€389.90~~

Little Lite Brackets — Front/Rear, Chrome, Pair

Reduced price

CYCLE VISIONS Little Lite Brackets — Front/Rear, Chrome, Pair

Durable 90° steel brackets for mounting auxiliary or turn signal lights. Made in the U.S.A.

€31.31 ~~€39.36~~

Reduced price

PARTS UNLIMITED Nylon License Plate Fasteners — License plate, 100 pack, black

Corrosion-resistant nylon fasteners that install and remove by hand. No tools required.

€30.01 ~~€40.64~~

Reduced price

CYCLE VISIONS Beveled License Plate Frame — Fits 4" x 7" plates, Chrome

Aluminum beveled frame with blind-hole design. Low-profile fit for all 4" x 7" license plates. Made in the USA.

€31.31 ~~€39.36~~

Beveled License Plate with Lights — fits 4" x 7" plates, 4-1/4" H, 7-1/4" W, Chrome

Reduced price

CYCLE VISIONS Beveled License Plate with Lights — fits 4" x 7" plates,...

Beveled license plate frame with integrated light and blind-hole design for a clean, low-profile finish. Made in the USA.

€62.60 ~~€78.71~~

In-Close License Plate Holder — 4" x 7", side mount for FXST/FLST & FXD/XL, chrome

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount for...

Billet aluminum; most tucked-in holder on the market; mounts off the axle on FXST/FLST and off-axle adjuster on FXD/XL; accepts most 4" x 7" plates; not for use with shock relocation kits or saddlebags.

€260.86 ~~€327.94~~

In-Close License Plate Holder — 10 cm (4"), 18 cm (7"), Chrome, Side mount

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 10 cm (4"), 18 cm (7"),...

Billet aluminum holder with no visible fasteners. Most tucked-in design. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Accepts most 4" x 7" plates. Not for use with shock relocation kits or saddlebags.

€260.86 ~~€327.94~~

Reduced price

CYCLE VISIONS Slick Signals Flat License Plate Frame — 4" x 7", flat, chrome

Low-profile frame with dual-function red LEDs on the top and sides. Accepts most standard U.S. license plates; wiring instructions included. Requires custom installation. Lighting is not DOT compliant.

€135.65 ~~€170.53~~

Reduced price

CYCLE VISIONS Slick Signals Flat License Plate Frame — 4" x 7", flat, black

Dual-function red LEDs on top and sides; fits most 4" x 7" plates; includes wiring instructions; requires custom installation.

€135.65 ~~€170.53~~

Curved Slick Signals License Plate Frame with 3-Hole Backing Plate — Rear mount, Chrome

Reduced price

CYCLE VISIONS Curved Slick Signals License Plate Frame with 3-Hole Backing...

Three-bolt mount fits most OEM fenders with a three-hole bolt pattern (not for bobbed fenders). Integrated LED run, turn, brake and plate lights. Lights require hardwiring.

€187.82 ~~€236.12~~

Curved Slick Signals License Plate Frame with 3-Hole Backing Plate — Rear, Black

Reduced price

CYCLE VISIONS Curved Slick Signals License Plate Frame with 3-Hole Backing...

Three-bolt curved license plate frame with integrated Slick Signals LED run, turn, brake and plate lights; lights require hardwiring.

€187.82 ~~€236.12~~

Curved License Mount with Frame — Harley Davidson® Slick Signals, Black, LED, Rear

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley Davidson® Slick...

Curved license plate mount with integrated LED frame. Lights are not DOT compliant and must be hardwired. CAN Bus models require a reflash; DOT certification valid only in the USA.

€260.86 ~~€327.94~~

Curved License Mount with Frame — Harley Davidson®, Slick Signals, Rear, Chrome

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley Davidson®, Slick...

Curved license plate mount with integrated LED frame. Powder-coated steel construction. Lights must be hardwired; not DOT compliant.

€260.86 ~~€327.94~~

Curved License Mount with Frame — Harley-Davidson®, Curved, Rear, Black

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley-Davidson®, Curved,...

Slick Signal license-frame with built-in LED run, turn and brake lights; not DOT compliant, must be hardwired; CAN Bus models require a reflash.

€260.86 ~~€327.94~~

Curved License Mount with Frame — Harley Davidson® fit, curved horizontal, black

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley Davidson® fit, curved...

Curved mount with integrated run, turn and brake lights. Not DOT compliant. Lights must be hardwired; CAN Bus models may require a reflash.

€260.86 ~~€327.94~~

Lighting

Contact us

Products

Our company