Lighting

Headlight Isolator Mounts — 1/4" (6.4 mm), 3-Pack

Reduced price

CYCLE VISIONS Headlight Isolator Mounts — 1/4" (6.4 mm), 3-Pack

Replacement rubber insulators with 1/4"-20 studs that reduce shock and extend headlight life.

€15.83 ~~€19.90~~

Headlight Mount Extension Hardware — Headlight extension, black, kit

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Headlight extension,...

Moves headlight forward for Memphis Shades fairings and windshields. Bezels may require trimming; instructions included.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black, MEB9885

Moves the front lamp forward to allow installation of most aftermarket fairings and windshields. Bezel trimming may be required; instructions and hardware are included.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Headlight, Polished

Moves the headlight forward for fairing and windshield fitment; trimming instructions included.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black

Moves the headlight forward to accommodate fairings and windshields; bezel trimming may be required; precision machined for a reliable fit.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Black, billet aluminum

Moves the headlight forward for Memphis Shades fairing and windshield installation; instructions included. Bezels may require trimming.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Billet aluminum, Black

Kit to move the headlight forward for fairing and windshield installations; includes trimming instructions for bezel clearance.

€24.52 ~~€30.83~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Kit, Black

Moves the headlight forward to fit aftermarket fairings and windshields; bezels may require trimming; precision-machined for strength.

€32.43 ~~€40.77~~

Reduced price

MEMPHIS SHADES HD Dual Headlight Extension Block — Black

Extension block for dual headlights compatible with Road Warrior fairing part # 2330-0204; direct-fit solution for improved clearance and alignment.

€24.30 ~~€30.54~~

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — MEB9882, Black

Moves the headlight forward for Memphis Shades fairing and windshield installation. Includes trimming instructions and precision-machined construction. Supplied as a kit.

€24.52 ~~€30.83~~

Headlight Trim Ring/Shroud Kit — 5-3/4", Chrome, fits Road Warrior Fairing

Reduced price

MEMPHIS SHADES HD Headlight Trim Ring/Shroud Kit — 5-3/4", Chrome, fits Road...

Includes a 5-3/4" trim ring and a paintable ABS shroud; required for certain aftermarket fairings.

€32.74 ~~€41.16~~

Rear Turn Signal Cover Plates — Rear, Chrome

Reduced price

CYCLE VISIONS Rear Turn Signal Cover Plates — Rear, Chrome

Fill the hole left when removing rear turn signals for a clean, factory appearance. Simple bolt-on fit and includes mounting hardware.

€30.55 ~~€38.40~~

Turn Signal Relocation Kit — Black, Pair

Reduced price

MEMPHIS SHADES HD Turn Signal Relocation Kit — Black, Pair

Allows relocation of turn signals for fairing installations; includes wire connector parts and injection-molded construction. Made in USA.

€15.05 ~~€18.91~~

Reduced price

CYCLE VISIONS Rear Turn Signal Cover Plates — Black, Pair

Conceals the hole in the rear fender strut cover after removing the turn signals; bolt-on installation.

€30.55 ~~€38.40~~

Reduced price

MEMPHIS SHADES HD Turn Signal Relocation Kit — Black

Relocates turn signals and includes all necessary hardware for a clean installation.

€24.52 ~~€30.83~~

In-Close License Plate Holder — 4" x 7", side mount, chrome

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount, chrome

Billet aluminum construction with no visible fasteners; most tucked-in holder on the market; mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL; accepts most 4" x 7" plates; made in the U.S.A.; not for use with shock relocation kits or saddlebags.

€155.39 ~~€195.34~~

In-Close License Plate Holder — 4" x 7" plate, side mount for FXST/FLST and FXD/XL, black

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7" plate, side mount for...

Billet aluminum, most tucked-in holder on the market; mounts off the axle for FXST/FLST and off the axle adjuster for FXD/XL. Accepts most 4" x 7" plates. Made in the U.S.A.

€189.55 ~~€238.28~~

License Backing Plate — Fits 4" x 7" plates, stainless steel, flat, horizontal

Reduced price

BARNETT License Backing Plate — Fits 4" x 7" plates, stainless steel,...

Heavy-gauge, highly polished backing plate for license only. Reinforces the plate, reduces vibration and bending, and improves appearance. Made in the USA.

€6.76 ~~€8.50~~

In-Close License Plate Holder — 4" x 7", side mount, black

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount, black

Billet aluminum side-mount license plate holder; accepts most 4" x 7" plates. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Not compatible with shock relocation kits or saddlebags.

€144.94 ~~€280.33~~

Reduced price

CYCLE VISIONS In-Close License Plate Holder — 4" H, 7" L, Side mount, Chrome

Most tucked-in license plate holder available. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Accepts most 4" x 7" plates. Not for use with shock relocation kits or saddlebags. Made in the U.S.A.

€208.49 ~~€262.11~~

Curved License Mount with Frame — Harley-Davidson®, rear mount, black, curved frame, LED signals

Reduced price

CYCLE VISIONS Curved License Mount with Frame — Harley-Davidson®, rear...

Low-profile curved license mount with integrated signal frame for rear installation. Not DOT compliant in all areas; hardwire required. CAN bus models may need a reflash.

€254.50 ~~€319.94~~

3-Hole Mounted LED Lighted License Plate Frame — Black

Reduced price

CYCLE VISIONS 3-Hole Mounted LED Lighted License Plate Frame — Black

Curved 3-hole 16-gauge steel back plate with powder-coated finish. LED lights require hard wiring. Not DOT approved; DOT certification valid only in USA.

€103.88 ~~€130.59~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Horizontal, black powder coat

Low-profile curved license plate holder with a durable powdercoat finish. Does not include license plate frame.

€112.17 ~~€141.01~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Black steel, horizontal

Heavy-gauge curved holder with powdercoat finish. Does not include license plate frame. Easy to mount with common hardware.

€112.17 ~~€141.01~~

Reduced price

CYCLE VISIONS Curved License Plate Holder — Black, Steel

Low-profile curved mount made from 10-gauge steel with a black powdercoat finish. Does not include license plate frame.

€112.17 ~~€141.01~~

Lucifer Lights — 12V, 7/8" dia., 1/2" H, red

Reduced price

CYCLE VISIONS Lucifer Lights — 12V, 7/8" dia., 1/2" H, red

Super bright two-function LED marker light. Measures .825" D x 1/2" H; requires 5/16" hole for mounting; 28" wire length; may need load equalizer.

€68.08 ~~€85.59~~

Lucifer Lights — 20 mm dia, 12.7 mm length, 5/16" mounting hole, 12 V, red

Reduced price

CYCLE VISIONS Lucifer Lights — 20 mm dia, 12.7 mm length, 5/16" mounting...

Super bright two-function LED marker lights. Compact .825" diameter x 1/2" height. Requires 5/16" mounting hole; 28" wire. Sold as a pair.

€74.89 ~~€94.15~~

Headlight Mount Extension Hardware — Top-mount headlight, billet aluminum, polished

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Top-mount headlight,...

Moves the headlight forward to accommodate compatible fairings and windshields; bezels may require trimming. Includes installation instructions.

€34.83 ~~€43.78~~

Reduced price

MEMPHIS SHADES HD Dual Headlight Extension Block — MEK9893, Chrome

Extends dual headlights to fit the Road Warrior fairing (part # 2330-0204), improving alignment and clearance.

€26.09 ~~€32.80~~

Headlight Mount Extension Hardware — Polished, Billet Aluminum

Reduced price

MEMPHIS SHADES HD Headlight Mount Extension Hardware — Polished, Billet Aluminum

Moves the headlight forward to allow fairing and windshield installation. Includes instructions for bezel trimming.

€24.52 ~~€30.83~~

Lighting

Contact us

Products

Our company