Home

Subcategories

Reduced price

RIVCO PRODUCTS Tri-Glide Bumper — Rear, Chrome

Durable rear bumper for Tri-Glide trikes; protects the rear fender and accepts optional flag socket holder.

€281.14 ~~€353.43~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 ~~€70.03~~

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

Reduced price

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 ~~€4,108.46~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 ~~€70.03~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 ~~€70.03~~

$Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm (5/16\"), 146 mm (5-3/4\"), Chrome, Clear$

Reduced price

MAGNUM SHIELDING Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm...

Polished braided fuel cross-over line with crystal-clear outer jacket, polished fittings, compression-style assemblies, and two rubber seal sizes. Made in the USA.

€44.76 ~~€56.68~~

Tornado Turbo Performance Kit — Black, TRASK

Reduced price

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 ~~€7,799.40~~

Reduced price

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK V-Line Chin Spoiler — Gray

The V-Line Chin Spoiler is a hand-laid fiberglass accessory with a gray gel coat finish, designed to fit with factory stock oil cooler and includes all necessary hardware.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Stock Rake

Fills the gap between wheel and frame for a clean bagger look; includes hardware and grille insert; supplied unfinished for custom paint.

€373.60 ~~€469.67~~

Reduced price

TRASK Shifter Linkage — 12" (30.6 cm), titanium, black

Carbon-fiber race-inspired look, lightweight high-strength alloy construction, Teflon-coated heim joints for longer life, smoother shifts, includes stainless steel hardware; made in the USA.

€130.76 ~~€164.39~~

Anti-Vibration Highway Pegs with 1-1/4" Clamps — 32 mm (1-1/4") clamp, Black

Reduced price

RIVCO PRODUCTS Anti-Vibration Highway Pegs with 1-1/4" Clamps — 32 mm...

Durable highway pegs with anti-vibration rubber pads, adjustable angle, fold-up design and secure clamps. Sold in pairs; made in USA.

€87.83 ~~€110.41~~

Designer Series Front Lower Brake Line Kit — Dual-disc, without ABS, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Front Lower Brake Line Kit — Dual-disc,...

Direct-fit front lower brake line kit with PTFE tubing, Kevlar aramid reinforcement and AN-3 fittings for simplified installation; compatible with ABS and non-ABS systems.

€114.08 ~~€144.45~~

Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10 mm 180° banjo, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10...

Superior two-piece design with direct-fit lower assembly
All-brazed manifold for leak-free, clean appearance
PTFE inner tubing with aramid braid reduces expansion
AN-3 fittings for straightforward installation

€42.92 ~~€54.35~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 23" length, 10 mm banjo

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece braided brake line kit with brazed manifold construction and crystal-clear outer jacket. AN-3 connections for easy installation. Made in the U.S.A. For certain models, one upper and lower kit is required — two kits per bike.

€51.32 ~~€64.98~~

Designer Series Braided Non-ABS Front Brake Line Kit — 25" (63.5 cm), 10 mm 90° banjo, Chrome Sterling Chromite II

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 25"...

Two-piece braided front brake line kit for non-ABS systems with brazed manifold, PTFE inner tubing reinforced with aramid, and AN-3 fittings. Made in the U.S.A.

€54.42 ~~€68.91~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 27", Chrome, 10 mm 90° banjo fitting

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Braided front upper brake line kit for non-ABS models. Two-piece design with brazed manifold and crystal-clear outer jacket. One upper + lower kit required; two kits per bike.