Home

Subcategories

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Polished

Billet vented dipstick that vents crankcase pressure, reduces blowby, and provides two read methods (FHS/FHU); includes two venting options.

€269.36 ~~€338.63~~

Unibar® — 32 mm (1-1/4") outside diameter, chrome, bolt-on

Reduced price

LINDBY Unibar® — 32 mm (1-1/4") outside diameter, chrome, bolt-on

Traditional OEM-style design, high-tensile tubing construction, easy installation with included hardware; not recommended with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Billet vented dipstick replaces the factory oil fill, reduces blowby pressure, improves oil control and helps maintain the correct hot oil level.

€269.36 ~~€338.63~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Polished, P/N 3085

Vents excess crankcase pressure through a PCV-style breather to reduce blowby and stabilize oil levels. Direct replacement for the factory oil fill spout; includes two venting options.

€269.36 ~~€338.63~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black, 3086

Billet vented dipstick reduces crankcase blowby, improves oil level stability and can increase mpg. Screws into the factory oil fill spout as a direct replacement. Two venting options: 1/8 NPT breather or quick-disconnect with hose and filter. Read hot oil at FHS (jiffy stand) or FHU (upright).

€269.36 ~~€338.63~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Vented Dipstick vents crankcase pressure and reduces blowby. Direct replacement for the factory oil fill dipstick; includes two venting options. Made in the USA.

€269.36 ~~€338.63~~

Reduced price

LINDBY Front Multibar® — 32 mm (1-1/4"), Black

Durable highway bar with bonded rubber footrests, rounded corners, replaceable pads, and easy bolt-on installation. Not for extended forward controls or floorboards.

€243.98 ~~€330.21~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Direct-replacement vented dipstick that reduces crankcase blowby, helps retain oil, and improves rev response. Two venting options and two hot-level reading methods.

€269.36 ~~€338.63~~

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

Reduced price

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 ~~€420.84~~

Reduced price

LINDBY Unibar® — Silver

Enhance your motorcycle with the Unibar®, featuring traditional OEM-style highway bars and durable construction.

€192.34 ~~€248.99~~

Reduced price

LINDBY Unibar® — Black

Traditional OEM-style highway bars made from high-tensile steel tubing with easy installation.

€197.15 ~~€255.21~~

Unibar® Highway Bar — 32 mm (1-1/4"), Chrome

Reduced price

LINDBY Unibar® Highway Bar — 32 mm (1-1/4"), Chrome

Traditional OEM-style highway bar with easy installation using included hardware; not recommended for use with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Unibar® — 32 mm (1-1/4") outside diameter, Black gloss powder-coated

Reduced price

LINDBY Unibar® — 32 mm (1-1/4") outside diameter, Black gloss...

Traditional OEM-style highway bars made from 1-1/4" high-tensile steel tubing. Easy bolt-on installation with included hardware. Not recommended for use with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Reduced price

LINDBY Magnumbar® Front Highway Bar — 38 mm (1-1/2"), black

Precision-bent front highway bar with wide neoprene O-rings for traction; not recommended for use with extended forward controls or extended floorboards.

€409.02 ~~€529.47~~

$Magnumbar® Front Highway Bar — 38 mm (1-1/2\")$

Reduced price

LINDBY Magnumbar® Front Highway Bar — 38 mm (1-1/2\")

Classic front highway bar with precision-bent construction for a reliable fit; not for extended forward controls or extended floorboards.

€409.02 ~~€529.47~~

Reduced price

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 ~~€55.81~~

Reduced price

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 ~~€225.56~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

Reduced price

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 ~~€73.88~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 ~~€29.93~~

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

Reduced price

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 ~~€417.99~~

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

Reduced price

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 ~~€417.99~~

Reduced price

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 ~~€417.99~~

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 ~~€159.70~~

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

Reduced price

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 ~~€128.73~~

Front Multibar® — 32 mm (1-1/4") outside diameter, Chrome finish

Reduced price

LINDBY Front Multibar® — 32 mm (1-1/4") outside diameter, Chrome finish

Durable front highway bar with bonded rubber footrests, rounded corners, and easy bolt-on installation. Not recommended for use with extended forward controls or floorboards.

€240.58 ~~€311.43~~

Reduced price

LINDBY Replacement Front Foot Pads — Multibar®, Black, Pair

Replacement rubber foot pads for front and rear motorcycle bars. Slip-resistant and easy to install.

€24.82 ~~€32.12~~

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 ~~€110.00~~

Showing 1-30 of 1134 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home