Home

Subcategories

In-Line Fuel Filter — 9.5 mm (3/8") fuel line, 40 micron, satin

Reduced price

PINGEL In-Line Fuel Filter — 9.5 mm (3/8") fuel line, 40 micron, satin

Cleanable, reusable 40 micron filter element with high-quality O-ring; includes filter and O-ring; made in the USA.

€48.49 ~~€60.96~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 ~~€70.03~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 ~~€70.03~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 ~~€70.03~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

$Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm (5/16\"), 146 mm (5-3/4\"), Chrome, Clear$

Reduced price

MAGNUM SHIELDING Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm...

Polished braided fuel cross-over line with crystal-clear outer jacket, polished fittings, compression-style assemblies, and two rubber seal sizes. Made in the USA.

€44.76 ~~€56.68~~

$Rear Shock Lowering Bracket Kit — Lowers 25–40 mm (1.00\"), Black$

Reduced price

PINGEL Rear Shock Lowering Bracket Kit — Lowers 25–40 mm (1.00\"), Black

Improves side-stand usability and rider control by lowering ride height; retains stock shock boot and installs in about 30 minutes.

€188.00 ~~€236.34~~

Reduced price

PINGEL Greaseable Shifter Shaft — Chrome

Smooths shift linkage for reduced resistance and fewer lockups. Accepts stock and aftermarket levers. Made in the USA.

€104.22 ~~€131.01~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

Reduced price

PINGEL Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

Removable wheel chock stabilizes the front wheel for transport; mounting brackets stay attached while the chock is easily removed.

€90.76 ~~€114.10~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

BARNETT Scorpion Clutch — Orange, Kit

Increases clutch capacity, smoother shifts, multiple spring pressures, includes hub, pressure plate, plates and springs; fits stock type basket.

€599.25 ~~€753.34~~

Reduced price

BARNETT Scorpion Clutch Assembly — 698-30-40017

Bolt-on clutch assembly with 100% more surface area and a new inner hub for improved engagement.

€1,191.80 ~~€1,498.26~~

Reduced price

BARNETT Scorpion Clutch Assembly — Hydraulic kit

Bolt-on basket, 100% more surface area, new inner hub — direct-fit clutch assembly.

€1,191.80 ~~€1,498.26~~

Scorpion Clutch Assembly With Lock-Up — Billet aluminum, Mechanical kit

Reduced price

BARNETT Scorpion Clutch Assembly With Lock-Up — Billet aluminum,...

Lock-up head with bolt-on basket, increased surface area, three coil spring sets for tuning up to 200+ HP, includes basket and inner hub. No cover modification required.

€1,514.51 ~~€1,903.96~~

Silver Electric Speed Shifter Kit — Chrome finish

Reduced price

PINGEL Silver Electric Speed Shifter Kit — Chrome finish

Electronic speed shifter kit enabling clutchless upshifts and downshifts, retains OEM shifting ability, includes dual‑button handlebar control, ignition kill module and installation instructions. Made in USA.

€1,554.16 ~~€1,953.79~~

Electric Easy Shift™ Speed Shifter Kit — Chrome

Reduced price

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome

Push-button shifting that suspends ignition for smooth up/down shifts; clutch only needed for starts and stops. Not suitable for 4-speed transmissions.

€1,554.16 ~~€1,953.79~~

Designer Series Front Lower Brake Line Kit — Dual-disc, without ABS, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Front Lower Brake Line Kit — Dual-disc,...

Direct-fit front lower brake line kit with PTFE tubing, Kevlar aramid reinforcement and AN-3 fittings for simplified installation; compatible with ABS and non-ABS systems.

€114.08 ~~€144.45~~

Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10 mm 180° banjo, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10...

Superior two-piece design with direct-fit lower assembly
All-brazed manifold for leak-free, clean appearance
PTFE inner tubing with aramid braid reduces expansion
AN-3 fittings for straightforward installation

€42.92 ~~€54.35~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 23" length, 10 mm banjo

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece braided brake line kit with brazed manifold construction and crystal-clear outer jacket. AN-3 connections for easy installation. Made in the U.S.A. For certain models, one upper and lower kit is required — two kits per bike.

€51.32 ~~€64.98~~

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 22 mm outlet, silver

Reduced price

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings to allow use of a high-flow fuel valve when converting from fuel injection to a carburetor. Made in the USA.

€65.51 ~~€82.36~~

Designer Series Braided Non-ABS Front Brake Line Kit — 25" (63.5 cm), 10 mm 90° banjo, Chrome Sterling Chromite II

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 25"...

Two-piece braided front brake line kit for non-ABS systems with brazed manifold, PTFE inner tubing reinforced with aramid, and AN-3 fittings. Made in the U.S.A.

€54.42 ~~€68.91~~

Reduced price

PINGEL Petcock Bung — 22 mm outlet, stainless steel, gray

Weld-on petcock bung for custom or repaired fuel tanks. Made in the USA.

€18.27 ~~€22.97~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 27", Chrome, 10 mm 90° banjo fitting

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Braided front upper brake line kit for non-ABS models. Two-piece design with brazed manifold and crystal-clear outer jacket. One upper + lower kit required; two kits per bike.

€53.75 ~~€68.05~~

Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT outlet, 5/16" hose, Chrome

Reduced price

PINGEL Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT...

Compact billet-brass fuel valve for high-mounted custom tanks; on/off/reserve selector, rear mounting, polished chrome finish.

€203.45 ~~€255.78~~

Reduced price

BARNETT Custom Valve Stem Cap — Anodized black

Made in the U.S.A. Durable, easy-to-install finish that protects the valve area.

€2.26 ~~€2.84~~

Showing 1-30 of 3309 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home