Home

Subcategories

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

Reduced price

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 ~~€4,108.46~~

Pinion Gear Locker Tool — pinion gear, Black

Reduced price

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 ~~€79.23~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Sprocket Lock Tool — Crankshaft, camshaft, Black

Reduced price

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 ~~€116.00~~

Reduced price

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 ~~€412.76~~

Reduced price

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 ~~€48.00~~

Reduced price

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 ~~€486.13~~

Reduced price

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 ~~€132.11~~

Reduced price

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 ~~€41.03~~

Reduced price

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 ~~€79.23~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 ~~€537.89~~

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 ~~€347.37~~

Reduced price

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 ~~€80.10~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 ~~€40.34~~

Tornado Turbo Performance Kit — Black, TRASK

Reduced price

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 ~~€7,799.40~~

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

Reduced price

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 ~~€436.19~~

Replacement Puller Plate — Black, Chrome

Reduced price

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 ~~€105.13~~

Reduced price

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 ~~€212.18~~

Reduced price

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

Reduced price

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 ~~€103.16~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 ~~€206.11~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK V-Line Chin Spoiler — Gray

The V-Line Chin Spoiler is a hand-laid fiberglass accessory with a gray gel coat finish, designed to fit with factory stock oil cooler and includes all necessary hardware.

€373.60 ~~€469.67~~

Reduced price

JIMS Transmission Rebuild Kit — 5-Speed

Complete set of gaskets, seals, locks and bearings to rebuild your transmission. Made in the U.S.A.

€377.08 ~~€474.04~~

Showing 1-30 of 934 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home