Home

Subcategories

Rear Adjustable Lowering Kit — Lowers 50–80 mm (2.0"), Silver

Reduced price

WILD 1 Rear Adjustable Lowering Kit — Lowers 50–80 mm (2.0"), Silver

Reduces seat height up to two inches. Customize the bike's look and feel after installation. Made in the U.S.A.

€75.67 ~~€95.13~~

Pinion Gear Locker Tool — pinion gear, Black

Reduced price

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 ~~€79.23~~

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€60.74 ~~€95.44~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Sprocket Lock Tool — Crankshaft, camshaft, Black

Reduced price

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 ~~€116.00~~

Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise, Black Satin

Reduced price

WILD 1 Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise,...

Precision-machined billet risers that fit 3-1/2" center-to-center spacing and work with standard 1" handlebars. Made in the USA.

€108.78 ~~€136.76~~

Reduced price

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 ~~€412.76~~

Reduced price

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 ~~€48.00~~

Reduced price

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 ~~€486.13~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, 3.5" riser spacing, Black

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined billet aluminum top clamp for a clean, secure fit. Fits models with 3.5" center-to-center riser spacing. Mounting hardware included.

€75.92 ~~€95.44~~

Reduced price

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 ~~€132.11~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, Black, Flat finish

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined top clamp that works with stock risers and most 1" handlebars. Fits 3.5" center-to-center riser spacing. Mounting hardware included.

€90.60 ~~€113.91~~

Reduced price

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 ~~€41.03~~

Reduced price

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 ~~€79.23~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Reduced price

WILD 1 [object Object]

1-1/4" Chubby® Handlebar — 25% thicker than stock, precision-machined at control mounts, compatible with hydraulic clutches, Throttle-By-Wire and H-D® heated grips; not for 883C/1200C or '24 Road Glide/Street Glide models.

€279.49 ~~€351.36~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 ~~€537.89~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 ~~€347.37~~

Reduced price

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 ~~€80.10~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 ~~€40.34~~

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

Reduced price

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 ~~€436.19~~

VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

Reduced price

TECHNORESEARCH VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

Dealer-grade VCM-Tr4 tuning and data-logging pack for Harley-Davidson Delphi EFI systems. Includes VCM-TR4, master key, cables, USB, and 2 digital licenses.

€801.00 ~~€1,036.88~~

Replacement Puller Plate — Black, Chrome

Reduced price

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 ~~€105.13~~

Reduced price

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 ~~€212.18~~

VCM Digital Tuning Licence — TECHNORESEARCH TR200020

Reduced price

TECHNORESEARCH VCM Digital Tuning Licence — TECHNORESEARCH TR200020

Single-motorcycle digital tuning license for use with Centurion Super Pro Plus and VCM-TR4 Dealer Pack. Licenses sold separately.

€187.50 ~~€310.00~~

Showing 1-30 of 1297 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home