Home

Subcategories

Pinion Gear Locker Tool — pinion gear, Black

Reduced price

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 ~~€79.23~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Reduced price

CULT WERK Suspension Limiter — Black, 4-Pack

Four soft rubber spring deflection limiters that reduce rear shock compression travel and prevent tire contact. Easy clip-on installation; no damper removal required.

€13.42 ~~€15.75~~

Suspension Limiter — 16 mm inside diameter, rear

Reduced price

CULT WERK Suspension Limiter — 16 mm inside diameter, rear

Universal rubber spring deflection limiters, set of 4. Limits rear shock compression travel; inner Ø 13mm, outer Ø 38mm, thickness 10mm. Quick clip-on installation, no damper removal required.

€3.50 ~~€4.11~~

Reduced price

CULT WERK Fork Boots

Fork Boots designed to cover chrome fork tubes and fit original fenders without the need for replacements.

€30.47 ~~€35.75~~

Reduced price

CULT WERK Fork Boots

Fork Boots designed to cover chrome fork tubes and fit original fenders without the need for replacements.

€32.60 ~~€38.25~~

Reduced price

CULT WERK Fork Boots — 49 mm (1.93"), Gloss Black

Conceals fork tubes below the fork bridge. Interior relief allows fender clearance during compression. CNC-milled for precise fit. Compatible with the original front fender.

€34.73 ~~€40.75~~

Sprocket Lock Tool — Crankshaft, camshaft, Black

Reduced price

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 ~~€116.00~~

Reduced price

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 ~~€412.76~~

Reduced price

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 ~~€48.00~~

Reduced price

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 ~~€486.13~~

Reduced price

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 ~~€132.11~~

Reduced price

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 ~~€41.03~~

Reduced price

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 ~~€79.23~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 ~~€537.89~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 ~~€347.37~~

Reduced price

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 ~~€80.10~~

Dash Cover for Harley — Low Rider S, Black Gloss

Reduced price

CULT WERK Dash Cover for Harley — Low Rider S, Black Gloss

Direct-fit dash cover that cleans up the tank and allows speedometer relocation.

€205.26 ~~€240.83~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Dash Cover for Harley — Low Rider S, Glossy Black

Reduced price

CULT WERK Dash Cover for Harley — Low Rider S, Glossy Black

Replacement dash cover that provides a clean tank appearance, enables speedometer relocation, is precision CNC-milled, and includes all mounting hardware.

€191.06 ~~€224.17~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 ~~€40.34~~

Reduced price

CULT WERK Lowering Kits — Rear, Black

Spacer kit to lower the rear by approx. 35 mm. CNC lasered and black powder coated. Includes hardware and 4 spring deflection limiters. Assembly approx. 15 minutes. 1 set = 2 pieces.

€138.50 ~~€162.50~~

Reduced price

CULT WERK Lowering Kits — Rear, Black

Spacer set for the lower shock absorber mount that lowers the bike about 35 mm; CNC lasered and black powder coated. Includes hardware and four spring deflection limiters. Assembly approx. 15 minutes. 1 set = 2 pieces.

€112.93 ~~€132.50~~

Dash Cover for Harley — Nightster, Glossy Black

Reduced price

CULT WERK Dash Cover for Harley — Nightster, Glossy Black

Replacement tank-top cover that enables moving the speedometer into the dash. Precision CNC-milled, exact-fit; includes all mounting hardware. Paint-ready or high-gloss finish.

€155.55 ~~€182.50~~

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

Reduced price

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 ~~€436.19~~

Showing 1-30 of 1638 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home