Home

Subcategories

Unibar® — 32 mm (1-1/4") outside diameter, chrome, bolt-on

Reduced price

LINDBY Unibar® — 32 mm (1-1/4") outside diameter, chrome, bolt-on

Traditional OEM-style design, high-tensile tubing construction, easy installation with included hardware; not recommended with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Reduced price

LINDBY Front Multibar® — 32 mm (1-1/4"), Black

Durable highway bar with bonded rubber footrests, rounded corners, replaceable pads, and easy bolt-on installation. Not for extended forward controls or floorboards.

€243.98 ~~€330.21~~

Pinion Gear Locker Tool — pinion gear, Black

Reduced price

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 ~~€79.23~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Reduced price

LINDBY Unibar® — Silver

Enhance your motorcycle with the Unibar®, featuring traditional OEM-style highway bars and durable construction.

€192.34 ~~€248.99~~

Reduced price

LINDBY Unibar® — Black

Traditional OEM-style highway bars made from high-tensile steel tubing with easy installation.

€197.15 ~~€255.21~~

Unibar® Highway Bar — 32 mm (1-1/4"), Chrome

Reduced price

LINDBY Unibar® Highway Bar — 32 mm (1-1/4"), Chrome

Traditional OEM-style highway bar with easy installation using included hardware; not recommended for use with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Unibar® — 32 mm (1-1/4") outside diameter, Black gloss powder-coated

Reduced price

LINDBY Unibar® — 32 mm (1-1/4") outside diameter, Black gloss...

Traditional OEM-style highway bars made from 1-1/4" high-tensile steel tubing. Easy bolt-on installation with included hardware. Not recommended for use with extended forward controls or extended floorboards.

€192.34 ~~€248.99~~

Polisport Utility Can Pro Octane 10L — 10.2 L, Red

Reduced price

POLISPORT Polisport Utility Can Pro Octane 10L — 10.2 L, Red

Professional-grade fuel jug with ergonomic dual handles, leak-proof cap, oil/fuel mixer attached, and non-slip base.

€30.73 ~~€41.58~~

Reduced price

LINDBY Magnumbar® Front Highway Bar — 38 mm (1-1/2"), black

Precision-bent front highway bar with wide neoprene O-rings for traction; not recommended for use with extended forward controls or extended floorboards.

€409.02 ~~€529.47~~

Polisport Utility Can Pro Octane 20L — 18.9 L, Red

Reduced price

POLISPORT Polisport Utility Can Pro Octane 20L — 18.9 L, Red

Durable HDPE construction with leak-proof cap and non-slip base. Two-handle design and included oil/fuel mixer simplify carrying and filling. ADR-homologated for Europe.

€33.81 ~~€45.75~~

$Magnumbar® Front Highway Bar — 38 mm (1-1/2\")$

Reduced price

LINDBY Magnumbar® Front Highway Bar — 38 mm (1-1/2\")

Classic front highway bar with precision-bent construction for a reliable fit; not for extended forward controls or extended floorboards.

€409.02 ~~€529.47~~

Reduced price

POLISPORT Polisport Quick Fill Spout — Black

Quick fill spout compatible with KTM tanks — fast pour, auto shut-off, 37 mm diameter, no spills.

€18.41 ~~€24.92~~

Sprocket Lock Tool — Crankshaft, camshaft, Black

Reduced price

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 ~~€116.00~~

Reduced price

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 ~~€412.76~~

Reduced price

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 ~~€48.00~~

Reduced price

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 ~~€486.13~~

Reduced price

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 ~~€132.11~~

Reduced price

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 ~~€41.03~~

Reduced price

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 ~~€79.23~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 ~~€537.89~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 ~~€347.37~~

Reduced price

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 ~~€80.10~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 ~~€40.34~~

Showing 1-30 of 1264 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home