Home

Subcategories

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

Reduced price

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 ~~€4,108.46~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Reduced price

101 OCTANE Tire Valve Set 90°

Colored tire valves that enhance the look of your rims while providing easier access for tire pressure checks.

€5.30 ~~€6.66~~

Reduced price

101 OCTANE Tire Valve Set 90°

Colored tire valves that enhance the look of your rims while providing easier access for tire pressure checks.

€5.30 ~~€6.66~~

Reduced price

101 OCTANE Tire Valve Set 90° — Silver

Coloured 90° tyre valves that replace original valves for easier pressure checks and added style.

€5.76 ~~€7.24~~

Reduced price

SLYFOX 49 mm Triple Clamps — Black, Upper

OE replacement 49 mm triple clamp that is lighter and stronger than stock. Replaces the headlight nacelle and gauge housing; ignition switch must be relocated.

€491.83 ~~€618.30~~

Reduced price

SLYFOX 49 mm FLH Triple Tree Set — 49 mm, Chrome

Converts 41 mm forks to 49 mm for FLH models; CNC-machined trees, stainless stem, accepts stock risers and bearings. Made in USA.

€835.15 ~~€1,049.90~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Dash Panel With Hole — Black matte, Carbon fiber

Reduced price

SLYFOX Dash Panel With Hole — Black matte, Carbon fiber

Pre-preg composite construction, UV-protected clear coat, includes rubber gasket and rear mounting tab, made in USA.

€260.81 ~~€385.73~~

Reduced price

SLYFOX Dash Panel — Black, gloss, carbon fiber

100% real pre-preg carbon fiber dash panel with UV-protected clear coat and included rubber seal. Made in the USA. CVO models will lose the light-up CVO emblem if equipped.

€260.81 ~~€385.73~~

Reduced price

SLYFOX Dash Panel — Carbon fiber, black matte

Factory-style dash panel with UV-protected clear coat and included rubber seal. Made in the USA. CVO models will lose light-up CVO Emblem if equipped.

€306.83 ~~€385.73~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

101 OCTANE Tyre valve tubeless straight short metal — Short, silver

Compact straight valve for tubeless rims on motorcycles, scooters and ATVs. Total length 3.6 cm; visible length 2.8 cm; fits rims from 10 inches.

€2.10 ~~€2.65~~

Reduced price

101 OCTANE Tyre valve Tubeless straight long TR413

Long, straight TR413 tyre valve suitable for tubeless rims on various vehicles.

€1.59 ~~€2.00~~

Tornado Turbo Performance Kit — Black, TRASK

Reduced price

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 ~~€7,799.40~~

Reduced price

101 OCTANE Tyre tubeless valve angled 60° — 16 mm feed-through

60° angled tubeless tyre valve for rims with 16 mm feed-through; ideal for scooters, quads and small-diameter wheels.

€1.59 ~~€2.00~~

Reduced price

101 OCTANE Tyre valve Tubeless straight short TR412

Short, straight TR412 valve suitable for tubeless motorcycle and scooter rims.

€1.59 ~~€2.00~~

Tyre valve Tubeless straight short TR412 — Short, TR-412, 10 pack, Black

Reduced price

101 OCTANE Tyre valve Tubeless straight short TR412 — Short, TR-412, 10...

Short straight tubeless tyre valve; total length 3.6 cm, visible 2.6 cm; fits 10–12 inch rims with 11.3 mm valve hole.

€6.82 ~~€8.50~~

Reduced price

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK V-Line Chin Spoiler — Gray

The V-Line Chin Spoiler is a hand-laid fiberglass accessory with a gray gel coat finish, designed to fit with factory stock oil cooler and includes all necessary hardware.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Stock Rake

Fills the gap between wheel and frame for a clean bagger look; includes hardware and grille insert; supplied unfinished for custom paint.

€373.60 ~~€469.67~~

Reduced price

BARNETT Scorpion Clutch — Orange, Kit

Increases clutch capacity, smoother shifts, multiple spring pressures, includes hub, pressure plate, plates and springs; fits stock type basket.

€599.25 ~~€753.34~~

Clutch Holder — 34 mm, 41 mm, fits Piaggio and Minarelli engines

Reduced price

101 OCTANE Clutch Holder — 34 mm, 41 mm, fits Piaggio and Minarelli engines

Removes clutch bell and loosens the bell-housing nut. Required for clutch, rear convertor and counter-pressure spring service. Spanner sizes: 34 mm, 41 mm; fits Piaggio and Minarelli engines.

€13.52 ~~€17.00~~

Reduced price

BARNETT Scorpion Clutch Assembly — 698-30-40017

Bolt-on clutch assembly with 100% more surface area and a new inner hub for improved engagement.

€1,191.80 ~~€1,498.26~~

Reduced price

BARNETT Scorpion Clutch Assembly — Hydraulic kit

Bolt-on basket, 100% more surface area, new inner hub — direct-fit clutch assembly.

€1,191.80 ~~€1,498.26~~

Showing 1-30 of 1197 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home