HARLEY

Reduced price

KHROME WERKS Handlebar ETC Grip Extension — Raw finish

Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.

€13.30 ~~€16.71~~

Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

Reduced price

MOTOGADGET Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

Digital data bus adapter that reads vehicle speed, engine speed and MIL from the vehicle data bus by H-D. No extra sensors required. Vibration and weather resistant. Electronics protected against voltage peaks. Complies with SAE. 38 mm × 19 mm × 13 mm; approx. 36 g.

€75.68 ~~€83.24~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 ~~€70.03~~

Reduced price

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss

Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.

€51.75 ~~€70.06~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 ~~€70.03~~

Handlebar Clamp — 1" clamping diameter, fits '74–'17 models, chrome

Reduced price

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74–'17 models,...

Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.

€19.85 ~~€26.88~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 ~~€70.03~~

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€60.74 ~~€95.44~~

Ignition Sensor Assembly — Harley Davidson®, Black/Gray

Reduced price

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black/Gray

Includes pickup, mounting plate and wires with connectors for straightforward installation.

€47.02 ~~€59.11~~

Reduced price

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black, Gray

Includes pickup, mounting plate and wires with connectors.

€47.02 ~~€59.11~~

Reduced price

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — For Harley-Davidson, Black, Gray

Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.

€47.02 ~~€59.11~~

Reduced price
Out of Stock

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.

€67.91

Reduced price

PAUGHCO Distributor Hold Down — Chrome

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€23.09 ~~€29.03~~

Reduced price

COVINGTONS Billet Aluminum Handlebar Clamp — 1" (25.4 mm), Black matte

CNC machined billet aluminum clamp that secures the full clamping area; fits most '99-'17 Harley-Davidson models with 3-1/2" on-center risers.

€100.48 ~~€126.31~~

Reduced price

DRAG SPECIALTIES Round Key Internal Contact Switch — Chrome

Metal housing with bright mirrored finish, printed circuitry contacts, six-lug terminals, includes two spare keys.

€28.84 ~~€39.05~~

Reduced price

DRAG SPECIALTIES Handlebar Riser Clamp — 1" , Black gloss

Two-piece design for secure clamping. Fits most standard risers. Easy installation and adjustment.

€31.97 ~~€43.28~~

Reduced price

DRAG SPECIALTIES Circuit Breaker — 40 A, threaded connector

Replacement circuit breaker offering reliable protection and easy installation for maintenance or repairs.

€6.18 ~~€8.37~~

Reduced price
Out of Stock

JOKER MACHINE Series 900 Handlebar Clamp Assembly — Black

Enhance your bike's performance and style with the Series 900 Handlebar Clamp Assembly, featuring high-quality aluminum construction and a unique design.

€101.16

Reduced price

DRAG SPECIALTIES Micro Relay with Diode — 12V, Black

Direct OEM replacement. Compact micro relay with integrated diode for reliable switching.

€9.84 ~~€13.32~~

Reduced price

DRAG SPECIALTIES Generator Drive Gear Bearing — 6202-2RS, Blue/Chrome

Direct-fit replacement component; meets or exceeds OEM specifications. Durable construction for extended service life.

€3.45 ~~€4.68~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, 3.5" riser spacing, Black

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined billet aluminum top clamp for a clean, secure fit. Fits models with 3.5" center-to-center riser spacing. Mounting hardware included.

€75.92 ~~€95.44~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, Black, Flat finish

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined top clamp that works with stock risers and most 1" handlebars. Fits 3.5" center-to-center riser spacing. Mounting hardware included.

€90.60 ~~€113.91~~

Reduced price

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 ~~€700.07~~

Bagger Nation "Super Clamp" One-Piece Handlebar Riser Clamp — 1" clamping diameter, Satin Silver

Reduced price

PAUL YAFFE BAGGER NATION Bagger Nation "Super Clamp" One-Piece Handlebar Riser Clamp —...

One-piece CNC-machined clamp for 1" or 1-1/4" handlebars. Satin finish, three setscrews, easy bolt-on installation.

€81.52 ~~€102.49~~

Reduced price

DRAG SPECIALTIES Crank Position Sensor — Black

High-quality replacement sensor for accurate crankshaft position detection.

€48.91 ~~€66.22~~

Reduced price

JOKER MACHINE Upper Handlebar Clamp — 1" clamping diameter, flat black

Racer-styled upper handlebar riser clamp that replaces the stock H-D Nightster top clamp and accepts the speedometer ring mount. For models with 3-1/2" on-center risers and offset mounting holes.

€43.72 ~~€54.95~~

Reduced price

DRAG SPECIALTIES Starter Shaft Thrust Washers — 2-pack

Precision thrust components for reliable axial support. Direct OEM replacement for correct fit and performance.

€3.99 ~~€5.40~~

Reduced price

JOKER MACHINE Indicator Light Handlebar Clamp — 1" clamp, Black gloss

Racing-styled replacement clamp with integrated speedometer ring mount. Made in the USA.

€50.93 ~~€68.95~~

Reduced price

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 10 mm (3/8"), M10 x 1.25, Chrome

Dependable hydraulic brake light switch with 19" long wires and terminals. Includes two washers; compact and easy to install.

€26.39 ~~€35.72~~

Accessory Mount — 1" handlebar (25.4 mm), 1/2" inside diameter (12.7 mm), Chrome

Reduced price

KURYAKYN Accessory Mount — 1" handlebar (25.4 mm), 1/2" inside diameter...

Universal mount for Küryakyn handlebar-mount accessories. 5/16" thru hole for standard fasteners. Low-profile design for neat installations.

€29.76 ~~€37.41~~

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY