HARLEY

Subcategories

Rear Adjustable Lowering Kit — Lowers 50–80 mm (2.0"), Silver

Reduced price

WILD 1 Rear Adjustable Lowering Kit — Lowers 50–80 mm (2.0"), Silver

Reduces seat height up to two inches. Customize the bike's look and feel after installation. Made in the U.S.A.

€75.67 ~~€95.13~~

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€60.74 ~~€95.44~~

Reduced price

NAMZ Antenna — Black, Harley Davidson®, Radio

Replacement antenna for models with a radio antenna. Plug-n-Play installation.

€20.73 ~~€27.64~~

Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise, Black Satin

Reduced price

WILD 1 Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise,...

Precision-machined billet risers that fit 3-1/2" center-to-center spacing and work with standard 1" handlebars. Made in the USA.

€108.78 ~~€136.76~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, 3.5" riser spacing, Black

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined billet aluminum top clamp for a clean, secure fit. Fits models with 3.5" center-to-center riser spacing. Mounting hardware included.

€75.92 ~~€95.44~~

Billet Aluminum Top Handlebar Clamp — 1" clamping diameter, Black, Flat finish

Reduced price

WILD 1 Billet Aluminum Top Handlebar Clamp — 1" clamping diameter,...

Precision-machined top clamp that works with stock risers and most 1" handlebars. Fits 3.5" center-to-center riser spacing. Mounting hardware included.

€90.60 ~~€113.91~~

Reduced price

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, Black, 6 Pack

Custom-colored hose clamps for braided and braided-rubber oil lines. Secure, vibration-resistant hold and made in the USA.

€30.40 ~~€40.53~~

Reduced price

NAMZ Colored Hose Clamps for Oil Lines — Gold, 3/8" oil lines, 6-pack

Custom-colored clamps for braided and rubber oil hoses; precision-extruded for durability, sold in multi-packs, made in the USA.

€31.18 ~~€41.57~~

Reduced price

WILD 1 [object Object]

1-1/4" Chubby® Handlebar — 25% thicker than stock, precision-machined at control mounts, compatible with hydraulic clutches, Throttle-By-Wire and H-D® heated grips; not for 883C/1200C or '24 Road Glide/Street Glide models.

€279.49 ~~€351.36~~

Reduced price

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, 6 pack

Custom-colored clamps for braided copper, stainless steel, and rubber oil lines; fits most manufacturers' braided rubber hoses.

€33.49 ~~€44.65~~

Reduced price

WILD 1 [object Object]

25% thicker, precision‑machined 1-1/4" Chubby® Handlebar with polished welds and diamond knurling. Works with hydraulic clutch, stock and most custom controls. Made in the U.S.A. Not compatible with 883C/1200C riser/clamp or '24 Road Glide/Street Glide.

€166.20 ~~€208.94~~

Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm (5/16"), 6 pack, Chrome

Reduced price

NAMZ Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm...

Custom-colored hose clamps for braided copper, stainless and most braided rubber fuel hoses. Suitable for FXST and custom bikes; made in USA.

€30.11 ~~€40.15~~

1-1/4" Chubby® Handlebar — 1-1/4" diameter, 36-1/2" width, 1" clamp, Satin Black

Reduced price

WILD 1 1-1/4" Chubby® Handlebar — 1-1/4" diameter, 36-1/2" width, 1"...

Beefier Chubby® handlebar with precision-machined mounts, knurled center, fits hydraulic clutch and Throttle-By-Wire; see compatibility notes.

€268.31 ~~€337.30~~

1-1/4" Chubby® Handlebar — 32 mm (1-1/4"), 88.9 mm rise, 36" width, Black Satin

Reduced price

WILD 1 1-1/4" Chubby® Handlebar — 32 mm (1-1/4"), 88.9 mm rise, 36"...

25% thicker than stock; precision machined at control mounts for superior fit and finish. Works with hydraulic clutch, most controls, Throttle-By-Wire and cable applications. Not for use with stock risers on 883C/1200C or '24 Road Glide/Street Glide.

€279.49 ~~€351.36~~

Reduced price

NAMZ Intensifier High-Low Module III — 12V, High/Low

Converts single-function LED bulbs into dual-function units for run/stop, run/turn or high/low use. Universal LED fitment up to 500 mA. Not compatible with incandescent or halogen bulbs. Made in the U.S.A.

€18.86 ~~€23.71~~

Reduced price

NAMZ Run, Brake and Turn Signal Module — 12 V, Black

Converts turn signals into running and brake lights while retaining turn function. Built-in load equalizer handles stock and small custom LEDs. Plug-in connectors and simple instructions for select models. Increases rear visibility. Made in the USA.

€138.05 ~~€184.07~~

1-1/4" Chubby® Handlebar — 1-1/4" diameter, 33" width, 14" rise, Satin black

Reduced price

WILD 1 1-1/4" Chubby® Handlebar — 1-1/4" diameter, 33" width, 14"...

Precision-machined 25% thicker handlebars with fluid bends for improved comfort and control. Compatible with Throttle-By-Wire and most controls; check model exclusions.

€352.17 ~~€442.73~~

Reduced price

NAMZ Trailer Isolator — For Harley-Davidson®

Inline isolator that protects the factory turn signal module and routes trailer lighting signals while drawing power from the motorcycle battery.

€100.28 ~~€133.71~~

1-1/4" Chubby® Bagger Handlebar — 1-1/4" (32 mm) dia, 34-1/2" (87.5 cm) width, 8-1/2" (21.5 cm) rise, Chrome

Reduced price

WILD 1 1-1/4" Chubby® Bagger Handlebar — 1-1/4" (32 mm) dia, 34-1/2"...

Thicker-than-stock Chubby® Bagger handlebar with precision-machined control mounts, fluid bends for comfort, polished welds and diamond knurling. Works with hydraulic clutch, most controls and Throttle-By-Wire. Made in the U.S.A. Not for use on specified models.

€279.49 ~~€351.36~~

Reduced price

NAMZ Mini Toggle Switch — 5 A, Chrome

Compact toggle switch that fits a 1/4" mounting hole; made in the U.S.A.

€11.94 ~~€15.92~~

Reduced price

NAMZ Mini Toggle Switch — 5 A, Chrome

Compact toggle switch. Mounts in a 1/4" hole. Made in the U.S.A.

€9.70 ~~€12.94~~

Reduced price

NAMZ Speedometer/Tripometer Reset Push Button — Black

Compact reset button for speedometer and trip meter. Durable construction, easy installation. Made in the U.S.A.

€9.70 ~~€12.94~~

Reduced price

NAMZ Rubber Reset Switch Boots — 5-pack, Black

Protects control actuators from moisture, dust and debris. Flexible design for reliable actuation and simple installation.

€10.70 ~~€14.27~~

Gauge Relocation Bracket — 1-1/4" T-Bar, 1-1/4" Riser, Black Satin

Reduced price

WILD 1 Gauge Relocation Bracket — 1-1/4" T-Bar, 1-1/4" Riser, Black...

Bolt-on bracket to relocate gauges for a cleaner cockpit; gauges not included. Made in the United States.

€214.64 ~~€269.83~~

Reduced price

NAMZ Starter Relay — 12V, 30A, Black

Dependable starter relay, made in the U.S.A.

€14.90 ~~€19.86~~

Reduced price

NAMZ 25 Amp Micro Relay/Socket Kit — 25 A, Black

Compact micro kit to replace worn electrical switching components and restore reliable starting performance. Easy plug‑in installation.

€8.94 ~~€11.92~~

Reduced price

NAMZ 25 Amp Micro Relay/Socket Kit — 25 A, Black

Compact replacement micro relay and socket assembly for quick, clean installations. Durable construction resists vibration and moisture. Plug-and-play wiring simplifies replacement.

€5.57 ~~€7.42~~

1-1/4" Chubby® Handlebar — 32 mm (1-1/4"), 12" rise, 36" width, Satin Black

Reduced price

WILD 1 1-1/4" Chubby® Handlebar — 32 mm (1-1/4"), 12" rise, 36"...

Beefier, precision-machined handlebars that improve comfort and control. Polished welds and diamond knurling; accepts heated grips and works with Throttle-By-Wire. Made in the USA. Not compatible with 883C/1200C stock riser/clamp mount or '24 Road Glide/Street Glide.

€441.52 ~~€555.06~~

1-1/4" Chubby® Bagger Handlebar — 10" rise, 9-1/2" pullback, satin black

Reduced price

WILD 1 1-1/4" Chubby® Bagger Handlebar — 10" rise, 9-1/2" pullback,...

25% thicker than stock, precision-machined control mounts, polished welds and diamond knurling. Works with Throttle-By-Wire and heated grips. Made in the U.S.A.

€430.39 ~~€541.06~~

Deutsch DT Sealed Connector Component — 1 Pin, Deutsch DT Series, Silver

Reduced price

NAMZ Deutsch DT Sealed Connector Component — 1 Pin, Deutsch DT...

Refill connector components for builder kits with a silicon rubber seal to reduce corrosion and moisture. OEM-compatible replacement parts; receptacles and plugs include required locks and are sold each. Made in the U.S.A.

€29.67 ~~€39.56~~

Showing 1-30 of 599 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY