HARLEY

Subcategories

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

Reduced price

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 ~~€4,108.46~~

PAUL YAFFE BAGGER NATION Y-Axle — 25 mm axle, 286 mm length, Chrome

Flush-mount front axle that accents the front fork and is made in the U.S.A.

PAUL YAFFE BAGGER NATION Y-Axle — 25 mm, 286 mm, front, black anodized

Flush-mount front axle accent for your front fork. Made in the U.S.A.

Reduced price

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — 6 gal, Raw

One-piece, no-weld dash bolts on; includes pop-up gas cap, rubber trim, and hardware.

€259.23 ~~€350.86~~

Razor Back Stretched Tank Kit — 6.5 US gal (24.6 L), Raw, Bolt-On

Reduced price

PAUL YAFFE BAGGER NATION Razor Back Stretched Tank Kit — 6.5 US gal (24.6 L), Raw, Bolt-On

Deep-drawn stretched tank kit that complements Bagger projects. Direct replacement for OEM tank. Handcrafted, pressure tested and sealed. Ships unpainted; caps not included.

€925.50 ~~€1,163.49~~

Bagger Nation "Super Clamp" One-Piece Handlebar Riser Clamp — 1" clamping diameter, Satin Silver

Reduced price

PAUL YAFFE BAGGER NATION Bagger Nation "Super Clamp" One-Piece Handlebar Riser Clamp —...

One-piece CNC-machined clamp for 1" or 1-1/4" handlebars. Satin finish, three setscrews, easy bolt-on installation.

€81.52 ~~€102.49~~

Tornado Turbo Performance Kit — Black, TRASK

Reduced price

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 ~~€7,799.40~~

Reduced price

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK V-Line Chin Spoiler — Gray

The V-Line Chin Spoiler is a hand-laid fiberglass accessory with a gray gel coat finish, designed to fit with factory stock oil cooler and includes all necessary hardware.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Stock Rake

Fills the gap between wheel and frame for a clean bagger look; includes hardware and grille insert; supplied unfinished for custom paint.

€373.60 ~~€469.67~~

PAUL YAFFE BAGGER NATION Y-Axle — 25 mm axle, 284 mm length, front, anodized black

A new twist on the flush-mount front axle. A great accent to your front fork. Made in the U.S.A.

Reduced price

TRASK Shifter Linkage — 12" (30.6 cm), titanium, black

Carbon-fiber race-inspired look, lightweight high-strength alloy construction, Teflon-coated heim joints for longer life, smoother shifts, includes stainless steel hardware; made in the USA.

€130.76 ~~€164.39~~

Reduced price

PAUL YAFFE BAGGER NATION Talon Front Fender — 21" wheel, steel

Aggressive claw-shaped front fender; 14-gauge steel; pre-drilled; E-coated; includes satin-finish spacer; made in the USA.

€332.35 ~~€417.82~~

Thicky Front Fender — 21" wheel, natural finish

Reduced price

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, natural finish

Lengthened front and rear with squared ends and thicker sidewalls for a modern look.

One-piece 14-gauge construction, pre-drilled for direct bolt-on installation; includes satin spacers/adaptors.

Ships ready for scuff, prime, and paint.

€332.35 ~~€417.82~~

Reduced price

PAUL YAFFE BAGGER NATION Slimline Custom Dash Kit — Unfinished

Custom, low-profile dash kit in primer; direct bolt-on and accepts console badges. May fit some M8 Softail® 5 gallon tanks with modification.

€223.20 ~~€302.09~~

Thicky Front Fender — 21" wheel, front mount, Natural

Reduced price

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, front mount, Natural

Lengthened one-piece front fender with squared ends and thicker sidewalls; pre-drilled and direct bolt-on. Arrives raw for primer and paint; includes satin spacers or optional black/chrome upgrades.

€332.35 ~~€417.82~~

FIX-Stand Angle Block — Black, powder-coated

Reduced price

PAUL YAFFE BAGGER NATION FIX-Stand Angle Block — Black, powder-coated

Five-minute install that stops kickstand digging and non-locking, increases lean angle, and protects the spring.

€97.55 ~~€122.63~~

Power Mirrors — Black anodized, screw-in mount, pair

Reduced price

PAUL YAFFE BAGGER NATION Power Mirrors — Black anodized, screw-in mount, pair

Hand-assembled custom mirrors with Paul's invisible tensioners. Includes mirrors, arms and hardware. Direct, bolt-on replacement for handlebar-mounted mirrors.

€213.67 ~~€268.61~~

Reduced price

TRASK Assault Series Cam Cover — Chrome

Transparent cam cover that matches Assault series air cleaners and allows internal inspection. Made in the USA.

€411.66 ~~€517.51~~

Reduced price

TRASK Assault Series Cam Cover — Black gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 ~~€504.89~~

Reduced price

TRASK Assault Series Cam Cover — Chrome

Transparent cover for viewing internal engine components. Matches the Assault series air cleaners. Made in the USA.

€401.61 ~~€504.89~~

Reduced price

TRASK Assault Series Cam Cover — Black Gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 ~~€504.89~~

Assault Series Cam Cover — TM-018R, Raw, Machined

Reduced price

TRASK Assault Series Cam Cover — TM-018R, Raw, Machined

Transparent cover for viewing internal engine components; matches Assault series air cleaners. Made in the USA.

€401.61 ~~€504.89~~

Assault Charge High-Flow Air Cleaner — Round, Black

Reduced price

TRASK Assault Charge High-Flow Air Cleaner — Round, Black

High-flow reusable air cleaner with snap-in velocity stack and hidden breather. Made in the USA.

€458.33 ~~€576.19~~

Reduced price

TRASK Assault Charge High-Flow Air Cleaner — Round, Chrome

High-flow, reusable air cleaner with plexiglass outer cover and snap-in velocity stack; dyno tested.

€458.33 ~~€576.19~~

Reduced price

PAUL YAFFE BAGGER NATION [object Object]

1" Classic Bagger Ape Handlebar — mandrel-bent 1" seamless steel, notched for electronic throttle, knurled and pre-drilled for internal wiring. Made in the U.S.A.

€139.45 ~~€175.36~~

Showing 1-30 of 379 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY