HARLEY

Subcategories

$Rear Shock Lowering Bracket Kit — Lowers 25–40 mm (1.00\"), Black$

Reduced price

PINGEL Rear Shock Lowering Bracket Kit — Lowers 25–40 mm (1.00\"), Black

Improves side-stand usability and rider control by lowering ride height; retains stock shock boot and installs in about 30 minutes.

€188.00 ~~€236.34~~

Reduced price

PINGEL Greaseable Shifter Shaft — Chrome

Smooths shift linkage for reduced resistance and fewer lockups. Accepts stock and aftermarket levers. Made in the USA.

€104.22 ~~€131.01~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Silver Electric Speed Shifter Kit — Chrome finish

Reduced price

PINGEL Silver Electric Speed Shifter Kit — Chrome finish

Electronic speed shifter kit enabling clutchless upshifts and downshifts, retains OEM shifting ability, includes dual‑button handlebar control, ignition kill module and installation instructions. Made in USA.

€1,554.16 ~~€1,953.79~~

Electric Easy Shift™ Speed Shifter Kit — Chrome

Reduced price

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome

Push-button shifting that suspends ignition for smooth up/down shifts; clutch only needed for starts and stops. Not suitable for 4-speed transmissions.

€1,554.16 ~~€1,953.79~~

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 22 mm outlet, silver

Reduced price

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings to allow use of a high-flow fuel valve when converting from fuel injection to a carburetor. Made in the USA.

€65.51 ~~€82.36~~

Reduced price

PINGEL Petcock Bung — 22 mm outlet, stainless steel, gray

Weld-on petcock bung for custom or repaired fuel tanks. Made in the USA.

€18.27 ~~€22.97~~

Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT outlet, 5/16" hose, Chrome

Reduced price

PINGEL Chopper Fuel Valve — 2" L x 1-1/2" H x 1-3/8" D, 3/8" NPT...

Compact billet-brass fuel valve for high-mounted custom tanks; on/off/reserve selector, rear mounting, polished chrome finish.

€203.45 ~~€255.78~~

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 1/4" NPT, Silver

Reduced price

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings so a carburetor can be supplied with adequate fuel on large-displacement engines. Designed for use with a Pingel fuel valve; made in the USA.

€89.82 ~~€112.91~~

Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished aluminum

Reduced price

PINGEL Power-Flo Fuel Valve — 1/4" NPT, 5/16" hose barb, polished...

Universal-fit fuel valve with reversible hose barb orientation and dependable on/reserve/off control. Made in the USA.

€112.58 ~~€141.53~~

Reduced price

PINGEL Fairing Mirror Drop Bracket Kit — Black

Drops OEM fairing mirrors for a bagger look while maintaining a clear OEM-quality image. Designed for FLHX; fits FLHT with minor drilling. Hardware and instructions included.

€233.45 ~~€419.27~~

Reduced price

PINGEL Shift Peg Extender — 38 mm (1-1/2 in.)

Moves the shift peg outward to aid short-inseam riders on bikes with wide gas tanks. Made in the U.S.A.

€61.28 ~~€77.04~~

Reduced price

PINGEL Vacuum Fuel Valve — 22 mm outlet, chrome finish

Vacuum-operated fuel valve that automatically stops fuel flow when left on; plated finish, single hose barb outlet; made in the USA.

€260.72 ~~€327.76~~

Power-Flo Fuel Valve — 3/8" NPT, 7.9 mm (5/16") hose barb

Reduced price

PINGEL Power-Flo Fuel Valve — 3/8" NPT, 7.9 mm (5/16") hose barb

Substantially higher fuel flow than OEM; ensures reliable delivery on stock and high-performance motorcycles. Made in USA. Not legal for use in CA.

€124.47 ~~€156.47~~

$Power-Flo Fuel Valve — 22 mm outlet, 7/9 mm (5/16\") hose barb, Chrome$

Reduced price

PINGEL Power-Flo Fuel Valve — 22 mm outlet, 7/9 mm (5/16\") hose...

High-flow fuel valve for reliable fuel delivery on stock and high-performance motorcycles. Made in the USA. Not legal for use in CA.

€143.90 ~~€180.90~~

Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16") hose barb, Chrome

Reduced price

PINGEL Power-Flo Fuel Valve — 22 mm outlet, 7.9 mm (5/16") hose barb,...

Substantially higher fuel flow than OEM or standard aftermarket valves
Required for adequate fuel delivery on stock and high-performance motorcycles
Made in the USA
Includes instructions to measure bolt pattern without calipers
Not legal for use in CA

€143.90 ~~€180.90~~

$Custom-Fit Spark Plug Wire Kit — 8 mm, 43 cm (17\"), Red$

Reduced price

SUMAX Custom-Fit Spark Plug Wire Kit — 8 mm, 43 cm (17\"), Red

Precut, high-temperature silicone spark plug wires with Spiro‑Pro core for superior conductivity, lower resistance, and longer life; designed for electronic ignitions.

€32.43 ~~€40.77~~

Custom-Fit Spark Plug Wire Kit — 8 mm, 44 cm, 45.5 cm, 77.5 cm, 86.5 cm, Red

Reduced price

SUMAX Custom-Fit Spark Plug Wire Kit — 8 mm, 44 cm, 45.5 cm, 77.5...

Distinctive, highly visible colors
Precut with plug/coil boots and terminals installed
Extra-high-temperature silicone boots and wires (protection up to 600°F)
Spiro-Pro core for superior conductivity
Low resistance for cooler operation and longer life
Compatible with electronic and point ignitions
Made in the USA

€57.90 ~~€72.79~~

Reduced price

SUMAX Custom-Fit Spark Plug Wire Kit — 8 mm, 44–86.5 cm, Blue

Designer plug wires with extra-high-temperature silicone and a Spiro-Pro core for superior conductivity and extended life. Precut with boots and terminals installed. Made in the USA.

€59.34 ~~€74.61~~

Reduced price

SUMAX 409 Pro Race Custom-Fit Spark Plug Wire Kit — Red, 10.4 mm

Precut, high-temp silicone wires with Spiro-Pro core for superior conductivity and longevity. Compatible with electronic and point ignitions. Made in USA.

€80.56 ~~€101.27~~

Reduced price

SUMAX 409 Pro Race Custom-Fit Spark Plug Wire Kit — 10.4 mm, Blue

High-performance custom-fit spark plug wires with Spiro-Pro core, precut boots, and heat-resistant silicone for long life and reliable ignition.

€80.56 ~~€101.27~~

Reduced price

SUMAX Pro Spark Plug Wires — 8 mm, Kit, Black

Precut spark plug wires with preinstalled boots and terminals. Extra-high-temperature silicone boots, Spiro-Pro core for superior conductivity and longer life. Made in the USA.

€57.90 ~~€72.79~~

Reduced price

SUMAX Pro Spark Plug Wires — 8 mm, Red

Precut spark plug wires with plug/coil boots and terminals preinstalled. Spiro-Pro core for higher conductivity and up to three to four times longer life than carbon-core wires. Made in the USA.

€57.90 ~~€72.79~~

Reduced price

SUMAX Pro Spark Plug Wires — 8 mm, Blue

Precut plug and coil boots with terminals installed, extra-high-temperature silicone construction, Spiro-Pro core for superior conductivity, made in the USA.

€57.90 ~~€72.79~~

Renegade Universal Brake Lines — 12", Front/Rear fitment, Twilight Black

Reduced price

RUSSELL Renegade Universal Brake Lines — 12", Front/Rear fitment,...

Preassembled universal brake lines with high-performance braided hose and crimp-on swivel ends for adaptable, race-capable braking performance.

€28.32 ~~€41.89~~

Renegade Universal Brake Lines — 38" length, Front/Rear, Twilight Black

Reduced price

RUSSELL Renegade Universal Brake Lines — 38" length, Front/Rear,...

Preassembled Russell stainless steel braided hose with PTFE liner; ready for adapter fittings; minimizes expansion for improved braking; made in the U.S.A.

€42.14 ~~€52.99~~

Reduced price

RUSSELL Renegade Universal Brake Lines — 42" length, Twilight Black

Preassembled high-performance braided hose with rugged inner liner and crimp-on female swivel ends.
Ready for adapter fittings; compatible with all brake fluids and racing applications.
Abrasion-resistant finish protects painted surfaces and suits retro and late-model customs.
Minimizes line expansion for improved braking feel; assembled in the U.S.A.

€39.15 ~~€49.23~~

Reduced price

PINGEL Driver Floorboard Extender Kit — +32 mm (1-1/4"), Black, Silver

Moves legs away from the gas tank and engine heat for increased comfort. Easy to install with included hardware. Works with oversized primary covers; compatible with fairing lowers, not with centerstand. Made in the USA.

€92.33 ~~€116.07~~

Showing 1-30 of 181 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY