HARLEY

Subcategories

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Polished

Billet vented dipstick that vents crankcase pressure, reduces blowby, and provides two read methods (FHS/FHU); includes two venting options.

€269.36 ~~€338.63~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 ~~€70.03~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Billet vented dipstick replaces the factory oil fill, reduces blowby pressure, improves oil control and helps maintain the correct hot oil level.

€269.36 ~~€338.63~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Polished, P/N 3085

Vents excess crankcase pressure through a PCV-style breather to reduce blowby and stabilize oil levels. Direct replacement for the factory oil fill spout; includes two venting options.

€269.36 ~~€338.63~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black, 3086

Billet vented dipstick reduces crankcase blowby, improves oil level stability and can increase mpg. Screws into the factory oil fill spout as a direct replacement. Two venting options: 1/8 NPT breather or quick-disconnect with hose and filter. Read hot oil at FHS (jiffy stand) or FHU (upright).

€269.36 ~~€338.63~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 ~~€70.03~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Vented Dipstick vents crankcase pressure and reduces blowby. Direct replacement for the factory oil fill dipstick; includes two venting options. Made in the USA.

€269.36 ~~€338.63~~

Reduced price

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 ~~€70.03~~

Reduced price

FEULING OIL PUMP CORP. Vented Dipstick — Black

Direct-replacement vented dipstick that reduces crankcase blowby, helps retain oil, and improves rev response. Two venting options and two hot-level reading methods.

€269.36 ~~€338.63~~

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

Reduced price

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 ~~€420.84~~

$Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm (5/16\"), 146 mm (5-3/4\"), Chrome, Clear$

Reduced price

MAGNUM SHIELDING Sterling Chromite® II Fuel Tank Cross-Over Line — 7.9 mm...

Polished braided fuel cross-over line with crystal-clear outer jacket, polished fittings, compression-style assemblies, and two rubber seal sizes. Made in the USA.

€44.76 ~~€56.68~~

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

Reduced price

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€5.82 ~~€8.29~~

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

Reduced price

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 ~~€73.88~~

Reduced price

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€17.83 ~~€22.41~~

Reduced price

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€13.63 ~~€17.14~~

Reduced price

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 ~~€29.93~~

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

Reduced price

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 ~~€417.99~~

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

Reduced price

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 ~~€417.99~~

Reduced price

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 ~~€417.99~~

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 ~~€159.70~~

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 ~~€110.00~~

Reduced price

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 ~~€28.23~~

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

Reduced price

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 ~~€417.99~~

Reduced price

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 ~~€1,867.94~~

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 ~~€189.80~~

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 ~~€165.26~~

Reduced price

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 ~~€143.79~~

Designer Series Front Lower Brake Line Kit — Dual-disc, without ABS, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Front Lower Brake Line Kit — Dual-disc,...

Direct-fit front lower brake line kit with PTFE tubing, Kevlar aramid reinforcement and AN-3 fittings for simplified installation; compatible with ABS and non-ABS systems.

€114.08 ~~€144.45~~

Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10 mm 180° banjo, Chrome

Reduced price

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10...

Superior two-piece design with direct-fit lower assembly
All-brazed manifold for leak-free, clean appearance
PTFE inner tubing with aramid braid reduces expansion
AN-3 fittings for straightforward installation

€42.92 ~~€54.35~~

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 23" length, 10 mm banjo

Reduced price

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece braided brake line kit with brazed manifold construction and crystal-clear outer jacket. AN-3 connections for easy installation. Made in the U.S.A. For certain models, one upper and lower kit is required — two kits per bike.

€51.32 ~~€64.98~~

Showing 1-30 of 2926 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY