HARLEY

Subcategories

Reduced price

CULT WERK Suspension Limiter — Black, 4-Pack

Four soft rubber spring deflection limiters that reduce rear shock compression travel and prevent tire contact. Easy clip-on installation; no damper removal required.

€13.42 ~~€15.75~~

Suspension Limiter — 16 mm inside diameter, rear

Reduced price

CULT WERK Suspension Limiter — 16 mm inside diameter, rear

Universal rubber spring deflection limiters, set of 4. Limits rear shock compression travel; inner Ø 13mm, outer Ø 38mm, thickness 10mm. Quick clip-on installation, no damper removal required.

€3.50 ~~€4.11~~

Reduced price

CULT WERK Fork Boots

Fork Boots designed to cover chrome fork tubes and fit original fenders without the need for replacements.

€30.47 ~~€35.75~~

Reduced price

CULT WERK Fork Boots

Fork Boots designed to cover chrome fork tubes and fit original fenders without the need for replacements.

€32.60 ~~€38.25~~

Reduced price

CULT WERK Fork Boots — 49 mm (1.93"), Gloss Black

Conceals fork tubes below the fork bridge. Interior relief allows fender clearance during compression. CNC-milled for precise fit. Compatible with the original front fender.

€34.73 ~~€40.75~~

Reduced price

SLYFOX 49 mm Triple Clamps — Black, Upper

OE replacement 49 mm triple clamp that is lighter and stronger than stock. Replaces the headlight nacelle and gauge housing; ignition switch must be relocated.

€491.83 ~~€618.30~~

Reduced price

SLYFOX 49 mm FLH Triple Tree Set — 49 mm, Chrome

Converts 41 mm forks to 49 mm for FLH models; CNC-machined trees, stainless stem, accepts stock risers and bearings. Made in USA.

€835.15 ~~€1,049.90~~

Reduced price

BARNETT Scorpion Clutch — Orange

Increases clutch capacity and smooths shifting; includes hub, pressure plate, clutch plates, and springs; fits stock-type baskets.

€654.89 ~~€823.29~~

Dash Panel With Hole — Black matte, Carbon fiber

Reduced price

SLYFOX Dash Panel With Hole — Black matte, Carbon fiber

Pre-preg composite construction, UV-protected clear coat, includes rubber gasket and rear mounting tab, made in USA.

€260.81 ~~€385.73~~

Reduced price

SLYFOX Dash Panel — Black, gloss, carbon fiber

100% real pre-preg carbon fiber dash panel with UV-protected clear coat and included rubber seal. Made in the USA. CVO models will lose the light-up CVO emblem if equipped.

€260.81 ~~€385.73~~

Reduced price

SLYFOX Dash Panel — Carbon fiber, black matte

Factory-style dash panel with UV-protected clear coat and included rubber seal. Made in the USA. CVO models will lose light-up CVO Emblem if equipped.

€306.83 ~~€385.73~~

Dash Cover for Harley — Low Rider S, Black Gloss

Reduced price

CULT WERK Dash Cover for Harley — Low Rider S, Black Gloss

Direct-fit dash cover that cleans up the tank and allows speedometer relocation.

€205.26 ~~€240.83~~

Reduced price

BARNETT Scorpion Clutch — Orange, fits stock-type basket

Greatly increases clutch capacity and delivers smoother, more progressive engagement. Multiple spring pressure options. Designed to fit the stock-type basket. Suitable for stock to high-performance applications.

€671.26 ~~€843.87~~

Dash Cover for Harley — Low Rider S, Glossy Black

Reduced price

CULT WERK Dash Cover for Harley — Low Rider S, Glossy Black

Replacement dash cover that provides a clean tank appearance, enables speedometer relocation, is precision CNC-milled, and includes all mounting hardware.

€191.06 ~~€224.17~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Increases clutch capacity with smoother, progressive engagement; multiple spring pressures; fits stock-type basket and OE HD hydraulic systems.

€654.89 ~~€823.29~~

Reduced price

CULT WERK Lowering Kits — Rear, Black

Spacer kit to lower the rear by approx. 35 mm. CNC lasered and black powder coated. Includes hardware and 4 spring deflection limiters. Assembly approx. 15 minutes. 1 set = 2 pieces.

€138.50 ~~€162.50~~

Reduced price

CULT WERK Lowering Kits — Rear, Black

Spacer set for the lower shock absorber mount that lowers the bike about 35 mm; CNC lasered and black powder coated. Includes hardware and four spring deflection limiters. Assembly approx. 15 minutes. 1 set = 2 pieces.

€112.93 ~~€132.50~~

Dash Cover for Harley — Nightster, Glossy Black

Reduced price

CULT WERK Dash Cover for Harley — Nightster, Glossy Black

Replacement tank-top cover that enables moving the speedometer into the dash. Precision CNC-milled, exact-fit; includes all mounting hardware. Paint-ready or high-gloss finish.

€155.55 ~~€182.50~~

Dash Cover for Harley — Nightster, Black Gloss

Reduced price

CULT WERK Dash Cover for Harley — Nightster, Black Gloss

Replacement dash cover for relocating the speedometer; precision 5‑axis CNC machining and all mounting hardware included.

€169.75 ~~€199.19~~

Reduced price

CULT WERK Tank Lifter — Black

Height-adjustable tank lifter (35–50 mm) that raises the front of the fuel tank to improve clearance and highlight the "Peanut" shape; allows wiring to be routed under the tank without altering cables.

€57.53 ~~€67.50~~

Reduced price

CULT WERK Tank Lifter — height 35–50 mm, Black

Height-adjustable tank lift (35–50 mm) raises the front attachment for improved 'Peanut' shaping and allows the wiring harness to be routed without modifying cables.

€46.17 ~~€54.17~~

Reduced price

BARNETT Scorpion Clutch — Orange, Kit

Increases clutch capacity, smoother shifts, multiple spring pressures, includes hub, pressure plate, plates and springs; fits stock type basket.

€599.25 ~~€753.34~~

Reduced price

BARNETT Scorpion Clutch Assembly — 698-30-40017

Bolt-on clutch assembly with 100% more surface area and a new inner hub for improved engagement.

€1,191.80 ~~€1,498.26~~

Reduced price

CULT WERK Spoiler Bobber — Black

Spoiler Bobber made from ABS plastic, available in Paintable (RAW) or Glossy Black (BK) finishes. Designed with precision machining for easy installation.

€191.06 ~~€224.17~~

Reduced price

BARNETT Scorpion Clutch Assembly — Hydraulic kit

Bolt-on basket, 100% more surface area, new inner hub — direct-fit clutch assembly.

€1,191.80 ~~€1,498.26~~

Reduced price

CULT WERK Spoiler Bobber — Front, Black

Available in paintable or glossy finish; paintable version needs no prep, glossy variant is ready to mount after removing the protective film. CNC-milled bores and included metal bracket ensure easy installation.

€191.06 ~~€224.17~~

Scorpion Clutch Assembly With Lock-Up — Billet aluminum, Mechanical kit

Reduced price

BARNETT Scorpion Clutch Assembly With Lock-Up — Billet aluminum,...

Lock-up head with bolt-on basket, increased surface area, three coil spring sets for tuning up to 200+ HP, includes basket and inner hub. No cover modification required.

€1,514.51 ~~€1,903.96~~

Reduced price

CULT WERK Chin Spoiler — Black (Raw), Front

Low-profile chin spoiler; available paintable (RAW) or glossy (BK); easy to mount to the supplied metal bracket; precision CNC-milled for a precise fit.

€176.85 ~~€207.50~~

Reduced price

CULT WERK Spoiler Bobber — Black

Spoiler Bobber made from ABS plastic, available in Paintable (RAW) or Glossy Black (BK) finishes. Designed with precision machining for easy installation.

€166.91 ~~€195.83~~

Reduced price

CULT WERK Spoiler Custom — Black

Custom Spoiler made of durable ABS plastic. Available in Paintable (RAW) or Glossy Black (BK) options. Easy installation with included metal bracket.

€347.31 ~~€407.50~~

Showing 1-30 of 866 item(s)

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY