VTwin & Specific Tools

Pinion Gear Locker Tool — pinion gear, Black

Reduced price

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 ~~€79.23~~

Scorpion Clutch Hub Puller — Orange, Anodized

Reduced price

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 ~~€91.64~~

Sprocket Lock Tool — Crankshaft, camshaft, Black

Reduced price

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 ~~€116.00~~

Reduced price

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 ~~€412.76~~

Reduced price

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 ~~€48.00~~

Reduced price

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 ~~€486.13~~

Reduced price

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 ~~€132.11~~

Reduced price

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 ~~€41.03~~

Reduced price

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 ~~€79.23~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 ~~€537.89~~

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 ~~€347.37~~

Reduced price

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 ~~€80.10~~

Reduced price

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 ~~€40.34~~

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

Reduced price

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 ~~€436.19~~

Replacement Puller Plate — Black, Chrome

Reduced price

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 ~~€105.13~~

Reduced price

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 ~~€212.18~~

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

Reduced price

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 ~~€103.16~~

Reduced price

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 ~~€206.11~~

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

Reduced price

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 ~~€152.03~~

Reduced price

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 ~~€108.89~~

Reduced price

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 ~~€56.16~~

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

Reduced price

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 ~~€21.77~~

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Reduced price

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€617.77 ~~€776.63~~

Reduced price

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 ~~€105.56~~

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

Reduced price

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 ~~€170.23~~

Reduced price

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 ~~€216.10~~

Reduced price

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 ~~€51.59~~

Reduced price

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 ~~€239.41~~

Reduced price

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 ~~€44.94~~

Reduced price

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 ~~€63.93~~

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools