Body & Frame

Billet Rear Frame Tail Section — 6061 billet aluminum, full race, kit, fits Trask Assault Glides

Reduced price

TRASK Billet Rear Frame Tail Section — 6061 billet aluminum, full...

Race-inspired, lightweight rear tail section that drops over 8 lb from stock. Direct replacement for stock applications. Hardware included; seat not included.

€3,268.09 ~~€4,108.46~~

Reduced price

TRASK Chin Spoiler — Stock Rake, Unfinished

Hand-laid construction with a gel coat finish; fills the gap between wheel and frame on Baggers; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler

Chin Spoiler enhances the appearance of your Bagger with hand-laid fiberglass construction and includes all necessary hardware for installation.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid construction with gel coat finish; includes hardware and grille insert; made in the USA.

€373.60 ~~€469.67~~

Reduced price

TRASK V-Line Chin Spoiler — Gray

The V-Line Chin Spoiler is a hand-laid fiberglass accessory with a gray gel coat finish, designed to fit with factory stock oil cooler and includes all necessary hardware.

€373.60 ~~€469.67~~

Reduced price

TRASK Chin Spoiler — Stock Rake

Fills the gap between wheel and frame for a clean bagger look; includes hardware and grille insert; supplied unfinished for custom paint.

€373.60 ~~€469.67~~

Reduced price

CYCLE VISIONS [object Object]

Covers the three holes on the rear fender when relocating the license plate mount. Made in the U.S.A.

€30.55 ~~€38.40~~

Reduced price

CYCLE VISIONS Pyramid Covers — Black, Rear

Covers the three holes on the rear fender above the taillight for a clean, finished look. Made in the U.S.A.

€30.26 ~~€38.04~~

$Fender Risers — 21\", front, black powder-coated$

Reduced price

CYCLE VISIONS Fender Risers — 21\", front, black powder-coated

Made of 13-gauge steel. Necessary for installation of larger wheels on Dresser models.

€35.64 ~~€44.80~~

Bagger-Tail Filler Panels — for '99–'13 hard bags

Reduced price

CYCLE VISIONS Bagger-Tail Filler Panels — for '99–'13 hard bags

Fill panels for Bagger-Tail hard bags; requires Bagger Tail brackets; 16-gauge cold-rolled steel; made in USA.

€205.28 ~~€258.06~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid fiberglass chin spoiler that helps fill the gap between the wheel and the front of the frame; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled, Black

Reduced price
Out of Stock

TRASK Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled,...

Lightweight spoiler pre-fit to install; includes stainless mesh, brackets and hardware. May require oil cooler cover modification. Not for CVO models.

€1,024.35 ~~€1,287.75~~

Reduced price

TRASK Swing Arm — Assault, Raw, TM-3200

Race-inspired billet swing arm — stock length with optional 2–4" stretch; ships raw and unassembled. Kits include chain guides, carbon cover plates, bearings and stainless hardware. Made in USA.

€3,077.36 ~~€3,868.69~~

Reduced price
Out of Stock

TRASK Swing Arm — Assault, Raw

Race-inspired modular swing arm, lighter than stock, supplied unfinished and unassembled; kits include chain guides, carbon covers, bearings and hardware.

€3,077.36 ~~€3,868.69~~

Reduced price

TRASK Swing Arm — Assault, Raw

Precision-machined, race-inspired swing arm; pocketed joints, bolt-on replacement, titanium axle and new spherical bearings. Ships unassembled for custom finishing.

€2,624.88 ~~€3,300.83~~

Reduced price

CYCLE VISIONS Fender Risers — 21" front, chrome

Allows installation of larger wheels on Dresser models; heavy-gauge construction; includes mounting hardware.

€52.17 ~~€65.59~~

Fender Risers — 23" wheels, front mount, chrome

Reduced price

CYCLE VISIONS Fender Risers — 23" wheels, front mount, chrome

Made of 13-gauge steel. Necessary for installation of larger wheels on Dresser models.

€58.77 ~~€73.89~~

Reduced price

CYCLE VISIONS Fender Risers — 23", front, black powder-coated

13-gauge steel construction. Necessary for installing larger wheels on Dresser models. Helps provide fender clearance while maintaining alignment.

€41.74 ~~€52.47~~

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame