Body & Frame

Custom Dresser Front Fender — 109 cm (43") contour, 14 cm (5-1/2") width, 21" wheel, LS-2, unfinished

Reduced price

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 109 cm (43") contour, 14 cm...

14-gauge stamped steel; pre-drilled for easy installation. Handmade in the USA. LS-2, LS-3 and OCF styles available.

€206.05 ~~€278.95~~

Custom Softail Front Fender — 21", 44-1/2" contour, 5-1/2" width, OCF

Reduced price

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21", 44-1/2" contour, 5-1/2"...

Raw, easy-to-paint front fender with 14-gauge steel construction and simple direct bolt-on installation; available in LS-2 and OCF styles. Made in the USA.

€286.33 ~~€359.95~~

Custom Softail Front Fender — 21" wheel, 43" contour, front, unfinished

Reduced price

RUSS WERNIMONT DESIGNS Custom Softail Front Fender — 21" wheel, 43" contour, front,...

14-gauge steel front fender with raw easy-to-paint finish and simple bolt-on installation; available in LS-2 or OCF style.

€233.38 ~~€315.95~~

Custom Dresser Front Fender — 105 cm contour, 15 cm width, 19" wheel, LS-3

Reduced price

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 105 cm contour, 15 cm width, 19"...

14-gauge stamped construction, inspected for straightness and pre-drilled for easy installation. Handmade in the USA. Available in LS-2, LS-3 and OCF styles.

€206.05 ~~€278.95~~

Custom Dresser Front Fender — 108 cm contour, 21" wheel fit, 14 cm width, Unfinished

Reduced price

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 108 cm contour, 21" wheel fit,...

14-gauge stamped steel front fender, pre-drilled with raw spacer, handmade in the USA. Available in LS-2, LS-3 and OCF styles; finish-ready.

€221.10 ~~€277.95~~

Custom Dresser Front Fender — 49" contour length, 26" wheel fit, 6" width, LS-2

Reduced price

RUSS WERNIMONT DESIGNS Custom Dresser Front Fender — 49" contour length, 26" wheel...

Handmade 14-gauge stamped steel front fender, pre-drilled for easy installation; available LS-2/LS-3/OCF styles. Measurements approximate.

€276.78 ~~€347.95~~

Flat Back Dresser Front Fender — 55-3/4" contour, 30" wheel, 6-1/2" width, 19-1/4" height, 47° rake, Unfinished

Reduced price

RUSS WERNIMONT DESIGNS Flat Back Dresser Front Fender — 55-3/4" contour, 30" wheel,...

Heavy-gauge one-piece raw steel front fender, laser trimmed and ready to paint. Raw aluminum spacers included. Made in the U.S.A.

€433.49 ~~€544.95~~

Flat Back Dresser Front Fender — 108 cm (42.5") contour, 8" width, 18" wheel, 30° rake, Raw

Reduced price

RUSS WERNIMONT DESIGNS Flat Back Dresser Front Fender — 108 cm (42.5") contour, 8"...

Heavy-gauge one-piece raw steel front fender; laser trimmed; includes raw aluminum spacers; made in the U.S.A.

€436.82 ~~€549.30~~

EZ-8 Front Fender — 40" contour, 21" wheel, 180–200 mm tire, unfinished

Reduced price

RUSS WERNIMONT DESIGNS EZ-8 Front Fender — 40" contour, 21" wheel, 180–200 mm tire,...

14-gauge stamped steel LS-2 style front fender with direct bolt-on fit and pre-drilled holes. Made in the USA; measurements are approximate.

€307.02 ~~€385.95~~

Custom Rear Fender — 85.5 cm (33-3/4"), 23 cm (9"), 20.3 cm (8"), swingarm, unfinished

Reduced price

RUSS WERNIMONT DESIGNS Custom Rear Fender — 85.5 cm (33-3/4"), 23 cm (9"), 20.3 cm...

Handmade heavy-gauge steel rear fender with wiring tubes; delivered undrilled for custom positioning and individually inspected for a flawless finish.

€305.10 ~~€383.55~~

Custom Rear Fender — Unfinished, swingarm fit, 85.5 cm contour (33-3/4")

Reduced price

RUSS WERNIMONT DESIGNS Custom Rear Fender — Unfinished, swingarm fit, 85.5 cm contour...

Heavy-gauge steel swingarm rear fender with wiring tubes; undrilled for custom fit. Handmade in the USA.

€271.22 ~~€340.95~~

Reduced price

CUSTOM CYCLE ENGINEERING Pivot Shaft

The Pivot Shaft stabilizes swing arm movement to enhance control at all speeds and features durable metal bushings with rubber isolators.

€658.02 ~~€827.24~~

Reduced price

CUSTOM CYCLE ENGINEERING Pivot Shaft — 19 mm (3/4")

Stabilizes swing arm movement for improved control. Pair of cylindrical metal bushings encased in vulcanized rubber for long-lasting vibration isolation.

€658.02 ~~€827.24~~

Reduced price

CUSTOM CYCLE ENGINEERING Pivot Shaft — 16.6 mm (5/8")

Stabilizes swing arm movement for improved control; matched pair with vulcanized rubber vibration isolators.

€658.02 ~~€827.24~~

Reduced price

CUSTOM CYCLE ENGINEERING Swingarm Retrofit — Rear

Adapts the improved 02-08 Touring swingarm to 84-01 Touring models. Requires 02-08 OEM swingarm with bearings and rear caliper. Made in USA.

€363.52 ~~€457.01~~

shop by category

Body & Frame

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame