Body & Frame (3)

Reduced price

CUSTOM CYCLE ENGINEERING Pivot Shaft — 19 mm (3/4")

Stabilizes swing arm movement for improved control. Pair of cylindrical metal bushings encased in vulcanized rubber for long-lasting vibration isolation.

€658.02 ~~€827.24~~

$Universal Stainless Steel Braided Oil Line — 1/8\" NPT fittings, 8.7 mm ID, 18\" length, chrome$

Reduced price
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8\" NPT...

Universal oil line with included compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€27.55 ~~€37.29~~

Reduced price

CUSTOM CYCLE ENGINEERING Pivot Shaft — 16.6 mm (5/8")

Stabilizes swing arm movement for improved control; matched pair with vulcanized rubber vibration isolators.

€658.02 ~~€827.24~~

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

Reduced price

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 ~~€368.91~~

Universal Stainless Steel Braided Oil Line — 51 cm (20"), 8.7 mm (11/32"), 1/8" NPT, Chrome

Reduced price

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 51 cm (20"), 8.7...

Universal braided oil line for reliable fluid transfer. Includes compression fittings. Measured overall, including fittings. Made in the USA.

€28.39 ~~€38.43~~

Reduced price

PRO-ONE PERF.MFG. Oil Tank Mount Stud Covers — Chrome

Fits the rubber mounts on Softail oil tanks. High-shine plated finish.

€22.83 ~~€30.90~~

Universal Stainless Steel Braided Oil Line — 22" length, 8.7 mm ID, 1/8" NPT fittings, chrome

Reduced price

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 22" length, 8.7...

Universal braided oil line with compression fittings; measured overall and made in the USA.

€29.22 ~~€39.54~~

Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

Reduced price

DRAG SPECIALTIES Legacy Lynx Gas Tank — 11.4 L (3 US gal.), weld-in, raw

Custom-styled, precision-made gas tank with raised bung and raw aluminum cap; ships unpainted, mount kit included.

€214.41 ~~€290.28~~

Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L, 1/8" NPT, Chrome

Reduced price

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 11/32" ID, 24" L,...

Braided stainless steel oil line for universal fit. Includes chrome compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€30.08 ~~€40.71~~

Reduced price

DRAG SPECIALTIES Legacy Gas Tank — 11.4 L (3 US gal), 22 mm outlet, raw finish

Precision-built Legacy Gas Tank with TIG-welded steel construction and unique custom styling. Ships unpainted; caps sold separately.

€208.35 ~~€282.08~~

Reduced price

DRAG SPECIALTIES Kickstand — 254 mm (10"), shortens 25.4 mm (1"), Black

Replaces OEM kickstands; suited for lowered suspension and measured per model specifications.

€47.83 ~~€64.75~~

Reduced price
Out of Stock

KURYAKYN Deluxe Neck Cover Kit — Chrome

Smooth, quickly installed covers that shroud the neck and extend down the frame; right-side cover enlarged to accommodate Road King in-line cruise control pull-off switch; includes two snap-on down tube pieces; easy to install.

€187.99 ~~€236.33~~

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

Reduced price
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 ~~€368.91~~

Reduced price
Out of Stock

DRAG SPECIALTIES [object Object]

Durable high-strength steel kickstand — direct OEM replacement with optional under-stock length for lowered bikes. Measured per model specifications.

€50.11 ~~€67.83~~

Tire Hugger Front Fender for Dresser — 21", Black

Reduced price

KLOCK WERKS Tire Hugger Front Fender for Dresser — 21", Black

Stamped heavy-gauge front fender with factory-style finish; includes mounting blocks and hardware. Made in the USA.

€293.45 ~~€368.91~~

Reduced price
Out of Stock

DRAG SPECIALTIES [object Object]

High-strength steel kickstand; direct OEM replacement. Under-stock length for lowered suspension. Measured from first bend to first bend for Big Twin, Softail, FLT and XL.

€47.26 ~~€63.99~~

Engine Oil Spout Kit — 6061-T6 aluminum, Chrome

Reduced price

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Chrome

CNC-machined filler with thread-in one-piece dipstick; fits most starters and aftermarket bearing doors. Instructions included.

€63.97 ~~€86.60~~

Reduced price

DRAG SPECIALTIES Pop-Up Gas Cap — 59.9 mm (2.36"), Black

Low-profile pop-up fuel cap; nearly flush fit, opens with a quarter-turn of the center; use OEM-style gasket for a positive seal.

€34.48 ~~€46.68~~

Replacement Oil Line Seals — 6-pack, Black

Reduced price
Out of Stock

DRAG SPECIALTIES Replacement Oil Line Seals — 6-pack, Black

Replacement seals for stainless steel braided oil lines. Made in the USA.

€4.15 ~~€5.62~~

Engine Oil Spout Kit — 323056, Black, Chrome

Reduced price

DRAG SPECIALTIES Engine Oil Spout Kit — 323056, Black, Chrome

Must-have for aftermarket hydraulic side covers, doors and actuators. Precision CNC-machined with a thread-in one-piece dipstick. Custom spout design and installation instructions included.

€63.97 ~~€86.60~~

Reduced price

PINGEL Kickstand — Shortens 50.8 mm (2"), Lowered, Chrome

TIG-welded steel design for strength and reliability.

Large foot pad and accessible kick tab for stable ground support.

Direct-fit mounting using the stock bracket and return spring.

Made in the U.S.A.

€249.89 ~~€314.15~~

Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear mount, E-Coating

Reduced price

KLOCK WERKS Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear...

Pre-drilled to match stock mounting locations. Protective corrosion-resistant finish. Made in the USA.

€479.33 ~~€602.59~~

Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

Reduced price

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, black or chrome finish

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. CNC-machined billet spout with thread-in one-piece dipstick to prevent blowout. Custom design fits most starters and bearing doors. Instructions included.

€115.47 ~~€156.32~~

$Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome$

Reduced price
Out of Stock

DRAG SPECIALTIES Fuel Level Gas Cap — 69.9 mm (2-3/4\"), Chrome

User-programmable LED fuel-level indicator with built-in low-fuel warning; push-in installation and wiring harness included. Fits left-side analog gauges.

€127.92 ~~€173.17~~

Reduced price

KLOCK WERKS Lower Fillers

Lower Fillers are designed to fill the gap between the lower fender and saddlebags, enhancing the overall aesthetic of your Harley-Davidson. Made from durable 16-gauge steel and includes installation hardware.

€122.24 ~~€153.68~~

Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Reduced price

DRAG SPECIALTIES Engine Oil Spout Kit — 6061-T6 aluminum, Black, Silver

Secure, easy oil fill for aftermarket side covers and bearing doors. CNC-machined billet with a thread-in one-piece dipstick. Instructions included.

€53.57 ~~€72.52~~

Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

Reduced price

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal.), Tunnel 3", Raw finish

Peanut-style custom gas tank with chrome mounting hardware. Requires sealing prior to use.

€103.14 ~~€139.63~~

Reduced price
Out of Stock

KURYAKYN Down Tube Covers

Stylish chrome covers for Harley-Davidson down tubes with easy snap-on installation.

€61.19 ~~€76.93~~

Reduced price
Out of Stock

KLOCK WERKS Rear Fender — Stock length, Rear, E-Coating

Pre-drilled to match stock mounting locations; heavy-gauge construction; corrosion-resistant finish; made in the USA.

€440.19 ~~€553.39~~

Reduced price

DRAG SPECIALTIES Engine Oil Spout Kit — Black, Silver

Essential oil spout kit for aftermarket hydraulic side covers, doors and actuators. Includes a thread-in one-piece dipstick and installation instructions.

€63.97 ~~€86.60~~

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company

shop by category

Body & Frame  

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Body & Frame