Home

Subcategories

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

Reduced price
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 ~~€468.80~~

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

Reduced price

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 ~~€496.54~~

Reduced price
Out of Stock

ANDREWS 1st Gear — 3.00:1

Replacement original stock ratio 1st gear set with 15T/20T cluster and 26T counter gear.

€170.86 ~~€214.80~~

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

Reduced price

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 ~~€409.31~~

Reduced price

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 ~~€480.90~~

Reduced price

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 ~~€411.95~~

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

Reduced price

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 ~~€480.90~~

Reduced price

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 ~~€52.21~~

Reduced price

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 ~~€480.90~~

Reduced price
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 ~~€462.41~~

Reduced price

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 ~~€480.90~~

Reduced price

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 ~~€468.80~~

Reduced price

RAM MOUNTS Universal Ball Mount — 31.8 mm (1-1/4"), Black, powder-coated

Compact ball mount for mirror-post installations; includes mounting hardware and a corrosion-resistant finish.

€21.02 ~~€26.43~~

Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black powder-coated

Reduced price

RAM MOUNTS Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black...

Compact universal ball mount that fits mirror post openings; includes 1-inch ball and mounting hardware.

€15.90 ~~€19.99~~

Double Socket Arm — 2" size, aluminum, ball mount, black powder-coated

Reduced price

RAM MOUNTS Double Socket Arm — 2" size, aluminum, ball mount, black...

Marine-grade double socket arm with black powder-coated finish. Fits 1" rubber ball, bases and adapters. Adjustable sockets for precise positioning.

€14.59 ~~€18.34~~

Reduced price

RAM MOUNTS Double Socket Arm — 3", fits 1" rubber ball, Black

Double socket arm with marine-grade aluminum construction and a black powder-coated finish; fits 1" rubber balls, bases and adapters.

€15.67 ~~€19.70~~

Reduced price

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 ~~€254.04~~

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Reduced price

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 ~~€218.29~~

B2 Grind Cam — Andrews, B2 grind, Gear type

Reduced price

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 ~~€254.04~~

Reduced price

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 ~~€254.04~~

Reduced price

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 ~~€254.04~~

Reduced price

RAM MOUNTS Self-Leveling Cup Holder and Cozy with 1" Ball — 1" ball, Black

Self-leveling cup holder and cozy with included 1" rubber ball for easy arm mounting. Includes a can insulator; fits many vehicles.

€20.48 ~~€25.74~~

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

Reduced price

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 ~~€254.04~~

Reduced price

RAM MOUNTS Cradle for Phones and GPS — Garmin 60, Black

Durable cradle for phones and handheld GPS. Includes two nuts and bolts. Ball mount adapter not included. Contents not included.

€10.20 ~~€12.82~~

Reduced price

RAM MOUNTS Cradle for Phones and GPS — Nuvi 50 compatibility, Black

High-strength composite cradle for phones and GPS. Includes two nuts and bolts for compatible mounts. Device not included.

€10.20 ~~€12.82~~

X-Grip® IV Large Device Cradle — 1.75–4.5 in device, 2.25–5.75 in tablet, depth 0.875 in, black

Reduced price

RAM MOUNTS X-Grip® IV Large Device Cradle — 1.75–4.5 in device, 2.25–5.75...

Spring-loaded four-leg cradle fits devices 1.75–4.5 in (tablet 2.25–5.75 in, 0.875 in depth) with rubber-coated tips for a secure hold.

€29.34 ~~€36.89~~

Reduced price

RAM MOUNTS X-Grip® Mount Kit — Handlebar mount, universal fit, black

Secure, adjustable X-Grip® cradle with patented ball-and-socket system, spring-loaded holder and rubber-coated tips. Includes all mounting hardware.

€60.98 ~~€76.66~~

Reduced price

RAM MOUNTS X-Grip® Mount Kit — U-bolt mount, universal cradle

Secure, adjustable device mount with a patented 1" rubber ball-and-socket system, spring-loaded holder, rubber-coated tips, and included hardware. Made in the USA.

€56.91 ~~€71.54~~

Reduced price

RAM MOUNTS X-Grip® Replacement Post Caps — 4 Pack, Black

Replacement post caps for RAM X-Grip holders. Includes four rubber caps and super glue. Compatible with all X-Grip versions.

€7.95 ~~€10.00~~

Spine Clip Holder with Ball for Garmin Handheld Devices — Ball, Black, Flat

Reduced price

RAM MOUNTS Spine Clip Holder with Ball for Garmin Handheld Devices —...

Secures Garmin handhelds with an integrated spine connection; includes B size diamond base adapter and hardware for broad mounting compatibility.

€12.02 ~~€15.11~~

Showing 1-30 of 151 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home