Home

Subcategories

Flush Mount Front Axle — 25.4 mm (1"), front-mounted, Black

Out of Stock

KLOCK WERKS Flush Mount Front Axle — 25.4 mm (1"), front-mounted, Black

High-strength, corrosion-resistant construction with hidden hardware for a clean, custom appearance.

Easy to install and built for long-term durability; made in the USA.

Reduced price

KLOCK WERKS Offset Logo Flexfit® Hat — S/M, Black

Custom embroidered patch on a breathable Flexfit® stretch hat. 98% cotton/2% spandex. Made in the U.S.A.

€32.48 ~~€40.82~~

$Flush Mount Front Axle — 25 mm (63/64\") , black$

KLOCK WERKS Flush Mount Front Axle — 25 mm (63/64\") , black

Stress-proof steel flush mount front axle with hidden hardware and stainless end caps. Easy installation and made in the USA.

Reduced price

KLOCK WERKS WFB™ Benchmark Rear Fender — 7.125" wide, rear fitment, E-Coating

Heavy-gauge stamped rear fender with extended length and included mounting hardware for direct replacement.

€489.11 ~~€614.89~~

WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

Reduced price
Out of Stock

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 21" wheel

Stamped 14-gauge U.S. steel front fender with rivetless sides, pre-drilled mounting, and extended rear tail. Made in USA.

€293.45 ~~€368.91~~

WFB™ Benchmark Front Fender — 6-1/2" fender, fits 16"/17"/18"/19" wheels, black

Reduced price

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" fender, fits...

Stamped 14-gauge U.S. steel, E-coated to resist rust; pre-drilled, rivetless smooth sides, extended 1.5" rear tail. Pairs with WFB™ rear fender. Made in the USA.

€293.45 ~~€368.91~~

Hugger Series Front Fender — 21" wheel, 5-15/16" outside mounting width

Reduced price

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 5-15/16" outside...

Steel front fender adds rigidity, comes stamped and pre-drilled for a consistent finish, resists corrosion; mounting blocks sold separately.

€293.45 ~~€368.91~~

Hugger Series Front Fender — 21", 45" contour, 5-7/8" width, E-Coating

Reduced price

KLOCK WERKS Hugger Series Front Fender — 21", 45" contour, 5-7/8" width,...

Adds front-end rigidity and Kustom styling. Stamped, pre-drilled for consistent fit and minimal body work. Protective coating resists corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 ~~€368.91~~

Tire Hugger Front Fender for Dresser — Fits 16–19" wheels, 6-1/4" width, Black E-coating

Reduced price
Out of Stock

KLOCK WERKS Tire Hugger Front Fender for Dresser — Fits 16–19" wheels,...

Stamped 14‑gauge steel front fender with 13‑step e-coated finish; laser cut, pre-drilled, includes mounting hardware. Made in the USA.

€293.45 ~~€368.91~~

Tire Hugger Front Fender for Dresser — 21", Black

Reduced price

KLOCK WERKS Tire Hugger Front Fender for Dresser — 21", Black

Stamped heavy-gauge front fender with factory-style finish; includes mounting blocks and hardware. Made in the USA.

€293.45 ~~€368.91~~

Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear mount, E-Coating

Reduced price

KLOCK WERKS Rear Fender — 99 cm (39") contour, 18 cm (7-1/8") width, rear...

Pre-drilled to match stock mounting locations. Protective corrosion-resistant finish. Made in the USA.

€479.33 ~~€602.59~~

Reduced price

KLOCK WERKS Lower Fillers

Lower Fillers are designed to fill the gap between the lower fender and saddlebags, enhancing the overall aesthetic of your Harley-Davidson. Made from durable 16-gauge steel and includes installation hardware.

€122.24 ~~€153.68~~

Reduced price
Out of Stock

KLOCK WERKS Rear Fender — Stock length, Rear, E-Coating

Pre-drilled to match stock mounting locations; heavy-gauge construction; corrosion-resistant finish; made in the USA.

€440.19 ~~€553.39~~

Hugger Series Front Fender — Fits 16" , 17" , 18" , 19" wheels, Black, 30-1/2" contour

Reduced price

KLOCK WERKS Hugger Series Front Fender — Fits 16" , 17" , 18" , 19"...

Stamped, pre-drilled construction for consistent fit
E-coated finish for corrosion resistance
Adds front-end rigidity while allowing custom shaping
Made in the USA; mounting blocks sold separately

€293.45 ~~€368.91~~

Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

Reduced price

KLOCK WERKS Hugger Series Front Fender — 5-7/8" width, fits 21" wheel, Black

Stamped, pre-drilled front hugger fender that adds rigidity and accepts custom shaping. E-coated for corrosion resistance. Made in USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 ~~€368.91~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Greatly increases clutch capacity and improves shift feel with multiple spring pressure options. Includes hub, pressure plate, plates and coil springs; fits stock-type basket and works with OE HD hydraulic systems.

€671.26 ~~€843.87~~

Reduced price

BARNETT Scorpion Low-Profile Lock-Up Clutch — Hydraulic lock-up kit,...

Fits under stock primary cover; progressive engagement for smoother shifting; reduced lever effort; no modifications required.

€991.45 ~~€1,246.40~~

$Hugger Series Front Fender — 21\", 101 cm (39-3/4\"), Black$

Reduced price

KLOCK WERKS Hugger Series Front Fender — 21\", 101 cm (39-3/4\"), Black

Adds front-end rigidity and can be customized for a Kustom look. Pre-drilled and stamped for a consistent fit; protective finish resists rust. Made in the USA. Mounting blocks sold separately.

€293.45 ~~€368.91~~

Hugger Series Front Fender — 21" wheel, 39.5" contour, Black

Reduced price

KLOCK WERKS Hugger Series Front Fender — 21" wheel, 39.5" contour, Black

Stamped, pre-drilled front fender that increases front-end rigidity and accepts customization. Protective corrosion-resistant finish. Made in the USA.

€293.45 ~~€368.91~~

Flare™ Windshield — 6-1/2" height, Black

Reduced price

KLOCK WERKS Flare™ Windshield — 6-1/2" height, Black

Redirects airflow with flared hips and a flipped top to add front downforce and reduce turbulence. Hard-coated polycarbonate, predrilled for stock hardware. Made in the USA.

€179.14 ~~€225.20~~

Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet Aluminum, Kit

Reduced price

BARNETT Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet...

Lock-up clutch assembly with bolt-on basket, 100% more surface area, three spring sets for tuning, fits under stock primary cover. Made in USA.

€1,514.51 ~~€1,903.96~~

Reduced price

BARNETT Scorpion Low-Profile Clutch Assembly With Lock-Up — Part No....

Low-profile clutch assembly with lock-up pressure plate, three spring sets for tuning, bolt-on installation, steel inner hub with bearing included.

€991.45 ~~€1,246.40~~

WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black, E-Coating

Reduced price

KLOCK WERKS WFB™ Benchmark Front Fender — 6-1/2" width, 26" wheel, Black,...

Rivetless, pre-drilled front fender with an extended 1.5" rear tail; pairs with WFB™ rear fender. Made in USA.

€322.80 ~~€405.80~~

Benchmark Front Fender for Dresser — 6-1/2" fender width, fits 16", 17", 18", 19", Black

Reduced price
Out of Stock

KLOCK WERKS Benchmark Front Fender for Dresser — 6-1/2" fender width, fits...

Durable stamped front fender with factory corrosion protection, chrome mounting blocks, and versatile fitment for custom use. Made in the U.S.A.

€352.15 ~~€442.70~~

Reduced price

BARNETT Replacement Scorpion Clutch Plate Set — Barnett Scorpion fit

Replacement fiber and steel clutch plates. For use with Barnett Scorpion clutches. Made in the U.S.A.

€177.51 ~~€223.15~~

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — BARNETT, 306-32-40443

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€194.63 ~~€244.67~~

Clutch Plate Set for Scorpion Clutch — 306-32-40543

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — 306-32-40543

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€182.33 ~~€229.22~~

Tire Hugger Series Front Fenders for Dressers — 6.5" width, 23" wheel, Black

Reduced price

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5" width,...

Thick steel front fenders that can be shaped for a custom look; stamped and pre-drilled, e-coated, and shipped with zinc-plated mounting hardware. Made in the U.S.A.

€322.80 ~~€405.80~~

Reduced price
Out of Stock

KLOCK WERKS Windshield — 16.5 cm (6-1/2 in), Dark Smoke, Flare

Windshield optimized for average rider height; works with factory mounting brackets. Mounting hardware not included.

€192.57 ~~€242.09~~

Tire Hugger Series Front Fenders for Dressers — 6.5 in fender width, 23 in wheel fit, Raked frame, Black

Reduced price

KLOCK WERKS Tire Hugger Series Front Fenders for Dressers — 6.5 in fender...

Stamped, pre-drilled Tire Hugger Series front fenders for dressers; rigid yet shapeable, treated for corrosion resistance, includes mounting hardware. Made in the USA.

€322.80 ~~€405.80~~

Showing 1-30 of 295 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home