Home

Subcategories

Reduced price

NAMZ Ground Loop Isolator — Black

Inline audio isolator reduces hum from ground loops; features RCA jacks and U.S. manufacture.

€13.82 ~~€18.42~~

Reduced price
Out of Stock

NAMZ Oxygen Enrichment Device — Black

Installs in minutes by plugging between the oxygen sensors and OEM wiring harness; recommended for high-flow intake/exhaust setups and lowers engine temperature 20–30 degrees.

€94.50 ~~€125.99~~

Reduced price

NAMZ Antenna — Harley Davidson®, Black

Replacement antenna for models with a radio antenna. Plug-n-play installation.

€15.33 ~~€20.44~~

Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm (5/16"), 6 Pack, Gold

Reduced price
Out of Stock

NAMZ Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm...

Custom-colored clamps for braided copper, stainless and most braided rubber hoses. Fits typical fuel line applications and is ideal for FXST and custom bikes.

€31.18 ~~€41.57~~

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Reduced price

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 ~~€7,799.40~~

Tornado Turbo Performance Kit — Polished

Reduced price

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 ~~€7,799.40~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Greatly increases clutch capacity and improves shift feel with multiple spring pressure options. Includes hub, pressure plate, plates and coil springs; fits stock-type basket and works with OE HD hydraulic systems.

€671.26 ~~€843.87~~

Reduced price

BARNETT Scorpion Low-Profile Lock-Up Clutch — Hydraulic lock-up kit,...

Fits under stock primary cover; progressive engagement for smoother shifting; reduced lever effort; no modifications required.

€991.45 ~~€1,246.40~~

Reduced price

TRASK Chin Spoiler — Unfinished

Hand-laid fiberglass chin spoiler that helps fill the gap between the wheel and the front of the frame; includes hardware and grille insert. Made in the USA.

€373.60 ~~€469.67~~

Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet Aluminum, Kit

Reduced price

BARNETT Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet...

Lock-up clutch assembly with bolt-on basket, 100% more surface area, three spring sets for tuning, fits under stock primary cover. Made in USA.

€1,514.51 ~~€1,903.96~~

Reduced price

BARNETT Scorpion Low-Profile Clutch Assembly With Lock-Up — Part No....

Low-profile clutch assembly with lock-up pressure plate, three spring sets for tuning, bolt-on installation, steel inner hub with bearing included.

€991.45 ~~€1,246.40~~

Reduced price

BARNETT Replacement Scorpion Clutch Plate Set — Barnett Scorpion fit

Replacement fiber and steel clutch plates. For use with Barnett Scorpion clutches. Made in the U.S.A.

€177.51 ~~€223.15~~

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — BARNETT, 306-32-40443

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€194.63 ~~€244.67~~

Clutch Plate Set for Scorpion Clutch — 306-32-40543

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — 306-32-40543

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€182.33 ~~€229.22~~

Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled, Black

Reduced price
Out of Stock

TRASK Assault Armor Carbon Fiber Chin Spoiler — Front, Air Cooled,...

Lightweight spoiler pre-fit to install; includes stainless mesh, brackets and hardware. May require oil cooler cover modification. Not for CVO models.

€1,024.35 ~~€1,287.75~~

Neutral Switch Eliminator — Stainless steel

Reduced price

NAMZ Neutral Switch Eliminator — Stainless steel

Replaces the stock neutral switch with a polished plug; neutral indicator light will not operate after installation.

€44.53 ~~€59.37~~

Reduced price

TRASK Fuel Regulator Housing — Red anodized

An anodized, CNC-machined billet housing that replaces the plastic OEM unit for greater durability. Made in the USA.

€65.33 ~~€82.13~~

Reduced price

NAMZ Momentary Switch Converter — High/Low

Converts momentary headlight and run switches into latched high/low and on/off functions. Made in the USA.

€93.56 ~~€124.74~~

Reduced price

NAMZ CAN Bus Controller — 12 V, CAN Bus, Hard Wire

Enables custom handlebar switches; plugs into the factory harness under the fuel tank. Does not work with keyless ignition.

€229.65 ~~€306.20~~

Reduced price

NAMZ CAN Bus Controller — 12V, CAN Bus connector

Allows for custom handlebar switch controls; plugs into the factory harness under the fuel tank; hard-wire integration; does not work with keyless ignition; made in the USA.

€229.65 ~~€306.20~~

Reduced price

TRASK Assault Series Cam Cover — Raw, Machined

Transparent cam cover designed to match Assault series air cleaners. Made in the USA.

€411.66 ~~€517.51~~

Assault Charge High-Flow Air Cleaner — Kit, Black

Reduced price

TRASK Assault Charge High-Flow Air Cleaner — Kit, Black

High-flow, reusable air cleaner with snap-in velocity stack and plexiglass cover; dyno tested and made in the USA.

€458.33 ~~€576.19~~

Reduced price

NAMZ Oil Sending Unit Cover — Billet aluminum, black

Protects the oil sending unit sensor and connector; precision-machined for a snug, low-profile fit. Made in the USA.

€48.43 ~~€60.89~~

Reduced price

NAMZ Oil Sending Unit Cover — Black

Covers and protects the oil sending unit sensor and connector. Easy installation with a smooth, horizontal finish.

€48.43 ~~€60.89~~

Reduced price

NAMZ Oil Sending Unit Cover — Black

Protects and conceals the oil sensor and connector; precision-machined for a secure fit. Made in the USA.

€48.43 ~~€60.89~~

Out of Stock

MITAS Sport Force+ Tire — 110/70 ZR17, Front

Radial sport tire for sport, naked and supermoto motorcycles. Superior grip in corners and stable high-speed precision.

Reduced price

NAMZ Oil Sending Unit Cover — Polished Silver, Billet Aluminum

Provides neat coverage for the oil sending unit sensor and connector. Made in the USA.

€48.43 ~~€60.89~~

Out of Stock

MITAS Sport Force+ Tire — 120/60ZR17, 55W, Front

Radial sport tire that combines excellent cornering grip with high-speed stability. Ideal for sport, naked and supermoto motorcycles.

Reduced price

NAMZ Oil Sending Unit Cover — Polished

Fits over the oil sending unit sensor and connector. Made from billet aluminum. Made in the USA.

€48.43 ~~€60.89~~

2-into-1 Nasty Bastard Exhaust System — 37" L, 3-1/2" muffler, billet turn-out end cap, Chrome

Reduced price

TRASK 2-into-1 Nasty Bastard Exhaust System — 37" L, 3-1/2" muffler,...

2-into-1 system with tapered megaphone turnout, performance baffle, and O2 port plug kit included.

€1,336.94 ~~€1,680.72~~

Showing 1-30 of 609 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home