+34 636 847 491 (10:00 - 13:30)
Home
Subcategories
Active filters
DRAG SPECIALTIES
Crankcase Vent Line — Chrome
Durable replacement for the OEM rubber crankcase-to-oil tank line; includes fittings for easy installation; made in the USA.
€54.26
€73.46
DRAG SPECIALTIES
Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"),...
Replaces stock rubber lower crossover lines with stainless steel lines and compression fittings; made in the USA.
€21.49
€29.09
DRAG SPECIALTIES
Mustang Gas Tank — 12.5 L (3.3 US gal.), 50 cm L, 3/8" NPT
Fat Bob-style low-tunnel gas tank for carbureted applications. ~3.3 US gal (12.5 L), single-cap, 3/8" NPT petcock mount. Ships unpainted. Not for fuel-injected models.
€108.98
€147.54
DRAG SPECIALTIES
Rectangular Mirror with Air Stem — 4-1/8" x 2-7/8", 5/16"-18,...
Universal rectangular side-view mirror with die-cast construction; reversible for right or left mounting. Includes mounting hardware.
€25.74
€34.85
DRAG SPECIALTIES
[object Object]
Kickstand Wedge Kit by Don Hotop. Adjusts kickstand angle at the frame for bikes lowered up to 2". Maintains foot board angle. 6061 billet aluminum construction. Includes fine- and coarse-thread bolts and installation instructions.
€40.72
€55.12
DRAG SPECIALTIES
Die-Cast Cable Clamp — 38.1 mm (1-1/2\"), Chrome
Economical alternative to billet clamps for simple, dependable cable retention.
€10.11
€13.69
DRAG SPECIALTIES
Swingarm Pivot Shaft Kit — Rear, Chrome
Complete swingarm pivot shaft kit with shaft, bushings, spacers, nut and washer for straightforward replacement.
€44.15
€59.77
DRAG SPECIALTIES
Shock Bolt/Stud Covers — Chrome, Upper
Protects and conceals shock fasteners for a clean, low-profile finish; quick slip-on installation.
€26.18
€35.44
DRAG SPECIALTIES SEATS
Small Low-Profile Spring Solo Seat — 33 cm (13"), 12.7 mm...
Low-profile spring solo seat constructed with closed-cell foam for a classic bobber look.
€166.49
€225.41
DRAG SPECIALTIES
Magnetic Ring Oil Filter — Spin-On, Chrome
Magnetic-ring filter captures loose metal particles and features a pressure relief valve for reliable fluid flow.
€8.86
€13.00
DRAG SPECIALTIES
Stainless Steel Braided Oil Line Kit — 4-line kit, chrome
Complete replacement kit with chrome-plated compression and NPT fittings. Direct OEM-fit replacement; made in the USA.
€126.42
€171.15
DRAG SPECIALTIES
Fuel Tank Crossover Line — 7.9 mm (5/16"), 137 mm (5-3/8"),...
Replacement lower tank connecting lines that swap the stock rubber hoses for durable metal replacements. Compression fittings ensure a positive seal. Made in the USA.
€21.49
€29.09
DRAG SPECIALTIES
Gas Cap with Paint Protectors — Left-hand thread, screw on,...
Low-profile gas cap with screw-in paint protectors and included installation tool. Ratchet-action cap for secure closure.
€53.84
€72.89
DRAG SPECIALTIES
One-Piece Extended Gas Tank — 5.1 US gal (19.3 L), 2"...
One-piece extended gas tank with a 5.1-gallon capacity and 2" extended length. Ships unpainted; caps not included. Seat nose may require modification.
€290.42
€393.19
DRAG SPECIALTIES
Custom Springer Forks — Standard, 31" length, 3/4" axle, Chrome
Fully assembled Springer front end with in-line top bracket; 31" measured from top bearing to axle; requires a wheel compatible with a 3/4" axle.
€478.51
€647.83
DRAG SPECIALTIES SEATS
Predator Seat — 32" overall, 16" driver, 10" width, 2-1/2"...
Lower-profile replacement seat with contoured foam, thermoformed ABS base, carpeted bottom, fits Drag and most H-D sissy bars; hardware included.
€352.68
€477.48
DRAG SPECIALTIES
Magnetic Ring Oil Filter — Spin-on, Chrome
Magnetic-ring filter captures loose metal particles and uses a pressure-relief valve to maintain consistent flow.
€9.64
€14.12
DRAG SPECIALTIES
Stainless Steel Braided Oil Line Kit — 6-Line Kit, Chrome
Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.
€153.41
€207.70
DRAG SPECIALTIES
Fuel Tank Crossover Line — 7.9 mm (5/16\") ID, 14.9 cm...
Direct-replacement braided crossover line that replaces the stock rubber lower lines; compression fittings provide a positive seal. Made in USA.
€21.49
€29.09
DRAG SPECIALTIES
Gas Cap with Paint Protectors — Chrome, Dummy
Replaces OEM fuel gauge in tanks with the fuel gauge on the left side; protects paint around the filler and provides a clean, factory appearance.
€34.91
€47.26
DRAG SPECIALTIES
Flamed Grips — 25.4 mm (1\"), Black, Chrome
Sculpted flame-accent grips with a comfortable textured surface and sealed ends for a clean custom look.
€96.32
€130.40
DRAG SPECIALTIES
Wide Blade Lever Set — Chrome, Brake, Clutch
Late-style wide, flat blade design; responsive feel; compatible with OEM lever perches.
€34.48
€46.68
DRAG SPECIALTIES
Buffalo Handlebar Clamp — 1" clamping diameter, Black gloss
Billet aluminum clamp that strengthens risers, supports sized-down and 1" handlebars, and fits 3-1/2" on-center risers.
€76.23
€103.20
DRAG SPECIALTIES
Polyurethane Handlebar Riser Bushing — Black matte, 4-Pack
Eliminates sloppy feel from soft or worn rubber bushings. 28% stiffer for improved control while retaining vibration absorption.
€3.81
€5.15
DRAG SPECIALTIES
Custom Springer Forks — Lifts 2.00" — Lifts 50,80 mm (2,00")
Custom Springer Forks provide an economical upgrade for your motorcycle, featuring a fully assembled design, compatibility with various brakes, and standard length measurements for easy installation.
€508.66
€688.65
DRAG SPECIALTIES
16" Chrome Steel Rim — 16" x 3", fits 5.00/5.10 tires, 40-hole
Accepts most spoke lacing patterns; for use with 5.00/5.10 motorcycle tires; rim only.
€63.65
€86.17
DRAG SPECIALTIES
Chrome Saddlebag Support Brackets — Chrome, Left/Right, Kit
Support brackets keep throw-over saddlebags away from brake caliper and swingarm; attach to shock studs or fender struts. Sold in pairs.
€54.61
€73.94
DRAG SPECIALTIES
Fat Bob Rear Fender — 30-1/2" contour, 7-1/4" width, Unfinished
Raw steel rear fender; available pre-drilled for OEM struts or undrilled for custom installs; includes taillight/license mount.
€125.35
€169.71
DRAG SPECIALTIES
Magnetic Ring Oil Filter — Spin-on, Chrome, 14-0020HPK-BX18
Captures fine metal particles with a central magnetic ring and includes an internal pressure relief valve to help maintain oil flow.
€10.01
€14.68
DRAG SPECIALTIES
Stainless Steel Braided Oil Line Kit — 4-line kit, chrome
Direct OEM replacement oil lines with chrome-plated compression and NPT fittings. Made in the USA.
€108.55
€146.95