Home

Subcategories

Reduced price

NAMZ Ground Loop Isolator — Black

Inline audio isolator reduces hum from ground loops; features RCA jacks and U.S. manufacture.

€13.82 ~~€18.42~~

Reduced price
Out of Stock

NAMZ Oxygen Enrichment Device — Black

Installs in minutes by plugging between the oxygen sensors and OEM wiring harness; recommended for high-flow intake/exhaust setups and lowers engine temperature 20–30 degrees.

€94.50 ~~€125.99~~

Reduced price

NAMZ Antenna — Harley Davidson®, Black

Replacement antenna for models with a radio antenna. Plug-n-play installation.

€15.33 ~~€20.44~~

Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm (5/16"), 6 Pack, Gold

Reduced price
Out of Stock

NAMZ Colored Hose Clamps for Fuel Line — 6.4 mm (1/4"), 7.9 mm...

Custom-colored clamps for braided copper, stainless and most braided rubber hoses. Fits typical fuel line applications and is ideal for FXST and custom bikes.

€31.18 ~~€41.57~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Greatly increases clutch capacity and improves shift feel with multiple spring pressure options. Includes hub, pressure plate, plates and coil springs; fits stock-type basket and works with OE HD hydraulic systems.

€671.26 ~~€843.87~~

Reduced price

BARNETT Scorpion Low-Profile Lock-Up Clutch — Hydraulic lock-up kit,...

Fits under stock primary cover; progressive engagement for smoother shifting; reduced lever effort; no modifications required.

€991.45 ~~€1,246.40~~

Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet Aluminum, Kit

Reduced price

BARNETT Scorpion Clutch Assembly With Lock-Up — Hydraulic, Billet...

Lock-up clutch assembly with bolt-on basket, 100% more surface area, three spring sets for tuning, fits under stock primary cover. Made in USA.

€1,514.51 ~~€1,903.96~~

Reduced price

BARNETT Scorpion Low-Profile Clutch Assembly With Lock-Up — Part No....

Low-profile clutch assembly with lock-up pressure plate, three spring sets for tuning, bolt-on installation, steel inner hub with bearing included.

€991.45 ~~€1,246.40~~

Reduced price

BARNETT Replacement Scorpion Clutch Plate Set — Barnett Scorpion fit

Replacement fiber and steel clutch plates. For use with Barnett Scorpion clutches. Made in the U.S.A.

€177.51 ~~€223.15~~

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — BARNETT, 306-32-40443

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€194.63 ~~€244.67~~

Clutch Plate Set for Scorpion Clutch — 306-32-40543

Reduced price

BARNETT Clutch Plate Set for Scorpion Clutch — 306-32-40543

Replacement clutch plate set for Scorpion clutches. Made in the U.S.A.

€182.33 ~~€229.22~~

Neutral Switch Eliminator — Stainless steel

Reduced price

NAMZ Neutral Switch Eliminator — Stainless steel

Replaces the stock neutral switch with a polished plug; neutral indicator light will not operate after installation.

€44.53 ~~€59.37~~

Reduced price

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 ~~€41.56~~

Reduced price

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 ~~€41.49~~

Reduced price

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 ~~€33.36~~

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

Reduced price

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 ~~€80.40~~

Reduced price

NAMZ Momentary Switch Converter — High/Low

Converts momentary headlight and run switches into latched high/low and on/off functions. Made in the USA.

€93.56 ~~€124.74~~

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

Reduced price

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 ~~€121.94~~

Reduced price

NAMZ CAN Bus Controller — 12 V, CAN Bus, Hard Wire

Enables custom handlebar switches; plugs into the factory harness under the fuel tank. Does not work with keyless ignition.

€229.65 ~~€306.20~~

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

Reduced price

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 ~~€98.59~~

Reduced price

NAMZ CAN Bus Controller — 12V, CAN Bus connector

Allows for custom handlebar switch controls; plugs into the factory harness under the fuel tank; hard-wire integration; does not work with keyless ignition; made in the USA.

€229.65 ~~€306.20~~

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

Reduced price

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 ~~€103.82~~

Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181 mm, Nickel

Reduced price

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181...

Precision reamer for manganese bronze and cast iron valve guides. Not advisable to use a reamer on bronze after it has been used on cast iron. Do not use on C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€54.03 ~~€73.12~~

Valve Guide Seal Installation Tools — Valve guide, 6061 T6 aluminum, set

Reduced price

KIBBLEWHITE Valve Guide Seal Installation Tools — Valve guide, 6061 T6...

Two-piece seal installer that centers valve seals for accurate, repeatable seating while minimizing burr formation.

€34.57 ~~€44.76~~

Replacement Valve Guide Seal Installation Tool — Valve Guide, Red anodized

Reduced price

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Valve Guide,...

Precision tool for workshop use; delivers repeatable alignment and seating for small mechanical components.

€7.10 ~~€9.64~~

Replacement Valve Guide Seal Installation Tool — Blue anodized, 6061 T6 aluminum

Reduced price

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Blue...

Replacement seal installers for guide seal installation tool sets — easy, consistent seating and simplified service workflow.

€7.10 ~~€9.64~~

Reduced price

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Silver anodized

Replacement seal installer for valve guide seal installation sets. Provides precise positioning, reduces rework, and is compact for shop use.

€7.10 ~~€9.64~~

Reduced price

NAMZ Oil Sending Unit Cover — Billet aluminum, black

Protects the oil sending unit sensor and connector; precision-machined for a snug, low-profile fit. Made in the USA.

€48.43 ~~€60.89~~

Reduced price

NAMZ Oil Sending Unit Cover — Black

Covers and protects the oil sending unit sensor and connector. Easy installation with a smooth, horizontal finish.

€48.43 ~~€60.89~~

Reduced price

NAMZ Oil Sending Unit Cover — Black

Protects and conceals the oil sensor and connector; precision-machined for a secure fit. Made in the USA.

€48.43 ~~€60.89~~

Showing 1-30 of 651 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home