Home

Subcategories

Reduced price

JIMS 5-Speed Transmission Assembly — Close ratio, Aluminum

CNC-machined gears and shafts matched to a .0002" tolerance; includes chrome trap door, side cover, top cover and hardware; made in the U.S.A.

€3,342.02 ~~€4,201.40~~

Reduced price

JIMS 6-Speed Overdrive Transmission — 0.86:1

Close-ratio first gear with stock 2nd–5th gears and an overdrive 6th; fits '91–'99 Evolution motors. Requires additional drive components and transmission lube; sold separately. Made in the U.S.A. from 8620 steel.

€3,714.42 ~~€4,669.56~~

6-Speed Right-Side-Drive Transmission — '90-'99 RSD Evolution-style Softail

Reduced price

JIMS 6-Speed Right-Side-Drive Transmission — '90-'99 RSD...

Durable 6-speed right-side-drive transmission with CNC billet top cover, built-in oil pump and hydraulic clutch; fits '90-'99 RSD Evolution-style Softail — modifications required.

€4,917.56 ~~€6,182.07~~

Crankshaft Bearing Tool — Right, Crankcase, Black

Reduced price
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 ~~€320.83~~

6-Speed Overdrive Super Kit — close-ratio, 2.94:1 1st gear, 0.86:1 6th gear

Reduced price

JIMS 6-Speed Overdrive Super Kit — close-ratio, 2.94:1 1st gear,...

Converts a stock 5-speed transmission to a smoother 6-speed overdrive. Includes gaskets and seals; may require speedometer block-off plate kit and recalibration.

€2,772.16 ~~€3,485.00~~

6-Speed Overdrive Super Kit — 2.94:1 first gear, 0.86:1 sixth gear

Reduced price

JIMS 6-Speed Overdrive Super Kit — 2.94:1 first gear, 0.86:1 sixth...

Converts a stock 5-speed transmission into a 6-speed overdrive kit that reduces vibration, lowers highway rpm, includes gaskets and seals; speedometer recalibration and block-off kit required.

€2,868.51 ~~€3,606.12~~

Reduced price

JIMS Fat 5™ 5-Speed Overdrive Super Kit — 5-speed, 0.886:1 overdrive

Direct-fit 5th-gear overdrive kit that installs into the stock transmission case; increases gear width and strength. Made in the U.S.A. Installation may require exhaust-bracket or oil-filler-spout modifications.

€3,529.18 ~~€4,436.68~~

Reduced price

JIMS Fat 5™ 5-Speed Overdrive Super Kit — 0.886:1 fifth gear

Slip-in overdrive fifth gear for stock transmission case. Compact shifter technology increases gear width and strength. May require exhaust bracket modification or oil filler spout spacer on some FL models.

€3,552.09 ~~€4,465.48~~

Reduced price

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 ~~€105.07~~

Reduced price
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 ~~€83.14~~

Reduced price
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 ~~€142.68~~

Suprema Spina Tire Warmer — M/L, Front ≤125/17, Rear ≤180/55-17, Red

Reduced price
Out of Stock

CAPIT Suprema Spina Tire Warmer — M/L, Front ≤125/17, Rear...

High-stability tyre warmers with uniform heating and durable polyester construction; waterproof, excellent tyre fit, reaches 90°C in about 50 minutes, and includes a 3-year warranty.

€262.73 ~~€289.00~~

Reduced price

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 ~~€63.44~~

Suprema Spina Tire Warmer — M/XL, Front ≤125/17, Rear ≤200/55-17, Green

Reduced price
Out of Stock

CAPIT Suprema Spina Tire Warmer — M/XL, Front ≤125/17, Rear...

Durable, waterproof polyester warmers that reach 90°C in 50 minutes; single pre-set temperature and exceptional uniformity.

€271.82 ~~€299.00~~

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

Reduced price

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 ~~€187.91~~

Suprema Spina Tire Warmer — M/XXL, Front ≤125/17, Rear ≥200/55-17, Green

Reduced price
Out of Stock

CAPIT Suprema Spina Tire Warmer — M/XXL, Front ≤125/17, Rear...

Direct mains connection with preset temperature, waterproof polyester shell, uniform Teflon heating coil, 50-minute warm-up to 90°C, 3-year guarantee.

€271.82 ~~€299.00~~

Suprema Vision Tire Warmer — Size M/XXL, Front ≤125/17, Rear ≥200/55-17

Reduced price
Out of Stock

CAPIT Suprema Vision Tire Warmer — Size M/XXL, Front ≤125/17, Rear...

Built-in controller up to 120°C (248°F); PID-regulated uniform heating, waterproof polyester construction, durable Teflon-wrapped heating coil, heat-resistant external cable, 3-year warranty, made in Italy.

€450.00 ~~€495.00~~

Reduced price

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 ~~€277.88~~

Reduced price

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 ~~€1,934.75~~

Reduced price
Out of Stock

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 ~~€281.63~~

Balancer Shaft Removal Tool — Left side, engine case, Black

Reduced price

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 ~~€353.43~~

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

Reduced price
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 ~~€537.17~~

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Reduced price
Out of Stock

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€446.75 ~~€561.63~~

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Reduced price

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 ~~€198.85~~

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

Reduced price

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 ~~€314.64~~

Reduced price

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 ~~€307.26~~

Reduced price

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 ~~€89.37~~

Reduced price

BARNETT Hydraulic Scorpion Clutch — Orange

Greatly increases clutch capacity and improves shift feel with multiple spring pressure options. Includes hub, pressure plate, plates and coil springs; fits stock-type basket and works with OE HD hydraulic systems.

€671.26 ~~€843.87~~

Reduced price

BARNETT Scorpion Low-Profile Lock-Up Clutch — Hydraulic lock-up kit,...

Fits under stock primary cover; progressive engagement for smoother shifting; reduced lever effort; no modifications required.

€991.45 ~~€1,246.40~~

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

Reduced price

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 ~~€59.97~~

Showing 1-30 of 504 item(s)

shop by category

Home

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home