Home (3)

Subcategories

Reduced price

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 ~~€27.06~~

Reduced price

MITAS Standard Duty Tubes — 19"

Standard Duty Tubes are ideal for motorcycles, scooters, and mopeds, featuring premium valve construction and durable 1.5 mm thickness.

€4.17 ~~€5.10~~

Reduced price

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 ~~€28.84~~

Reduced price

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 ~~€246.80~~

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Reduced price

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 ~~€246.80~~

Reduced price

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 ~~€304.91~~

Reduced price

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 ~~€289.24~~

Reduced price

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 ~~€496.54~~

Reduced price

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 ~~€248.10~~

Reduced price

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 ~~€120.44~~

Reduced price

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 ~~€409.44~~

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

Reduced price

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 ~~€409.44~~

Reduced price

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 ~~€409.44~~

Inner Tube — 10", 120/70-10, 130/70-10, 1.5 mm, JS-87 valve

Reduced price

MITAS Inner Tube — 10", 120/70-10, 130/70-10, 1.5 mm, JS-87 valve

High-quality butyl tube for motorcycles, scooters and mopeds. Individually packaged in nitrogen for extended shelf life. Standard-duty thickness for everyday use.

€3.60 ~~€4.40~~

Reduced price

MITAS Standard Duty Tubes — 14"

Standard Duty Tubes are ideal for motorcycles, scooters, and mopeds, featuring premium valve construction and durable 1.5 mm thickness.

€4.50 ~~€5.50~~

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

Reduced price

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 ~~€501.52~~

Reduced price

MITAS Standard Duty Tubes — 16"

Standard Duty Tubes are ideal for motorcycles, scooters, and mopeds, featuring premium valve construction and durable 1.5 mm thickness.

€6.14 ~~€7.50~~

Reduced price

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 ~~€496.54~~

Reduced price

MITAS Standard Duty Tubes — 15"

Standard Duty Tubes are ideal for motorcycles, scooters, and mopeds, featuring premium valve construction and durable 1.5 mm thickness.

€6.31 ~~€7.70~~

Standard Duty Tubes — 16" rim, 1.5 mm, 140/70-16, 150/80-16

Reduced price

MITAS Standard Duty Tubes — 16" rim, 1.5 mm, 140/70-16, 150/80-16

Standard duty inner tube for motorcycles, scooters and mopeds; premium valve construction and nitrogen-packed pouches for extended shelf life.

€6.31 ~~€7.70~~

Standard Duty Tubes — 18", fits 110/90-18, 120/80-18, 120/90-18, 130/80-18, 4.00-18, 1.5 mm

Reduced price

MITAS Standard Duty Tubes — 18", fits 110/90-18, 120/80-18,...

Standard duty inner tube for motorcycles, scooters and mopeds; premium valve hardware with washers and caps; sold in individual protective pouches.

€4.75 ~~€5.80~~

Standard Duty Tubes — 21" rim, fits 2.50–3.60-21 and 80/100-21 sizes, 1.5 mm thickness

Reduced price

MITAS Standard Duty Tubes — 21" rim, fits 2.50–3.60-21 and 80/100-21...

Standard-duty inner tube for motorcycles, scooters and mopeds; individually pouch-packed for extended shelf life.

€5.07 ~~€6.20~~

$Inner Tube — 4.10-10, 10\", JS-87 valve, 1.5 mm$

Reduced price

MITAS Inner Tube — 4.10-10, 10\", JS-87 valve, 1.5 mm

High-quality butyl inner tube for motorcycles, scooters and mopeds. Individually pouch-packed in a nitrogen-rich atmosphere for extended shelf life.

€4.75 ~~€5.80~~

Reduced price

MITAS Standard Duty Tubes — 17"

Standard duty inner tube designed for motorcycles, scooters, and mopeds.

€4.50 ~~€5.50~~

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Reduced price

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 ~~€247.84~~

J Grind Cam — 242° duration, 0.405" lift

Reduced price

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 ~~€247.84~~

Reduced price

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 ~~€247.84~~

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Reduced price

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 ~~€248.10~~

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

Reduced price

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 ~~€248.10~~

Standard Duty Tubes — 17", 1.5 mm, TR-6 valve

Reduced price

MITAS Standard Duty Tubes — 17", 1.5 mm, TR-6 valve

Standard duty inner tube for motorcycles, scooters and mopeds. Sold individually in nitrogen-packed pouches for extended shelf life.

€6.06 ~~€7.40~~

Showing 61-90 of 724 item(s)

shop by category

Home

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Contact us

Products

Our company

shop by category

Home  

Subcategories

HARLEY

TOOLS

TIRES

APPAREL

MAINTENANCE

Home