+34 636 847 491 (10:00 - 13:30)
HARLEY
Subcategories
BARKBUSTERS
Hardware Kit – Two Point Mount — Handguard Mount, pair, silver
Two-point hardware kit for full wrap-around guards. Heat-treated backbone, bar end weights included. Easy installation. Hardware kit only — no plastic guards included. Compatible with JET, VPS, STORM, CARBON guards (sold separately).
€73.07
€96.00
BARKBUSTERS
Handguard Storm for 25.4mm Handlebar — 25.4 mm, Black
Weather-protection handguard for 25.4 mm handlebars. Single point mount; not for impact protection. Plastic guard included. Easy installation.
€70.68
€92.80
BARKBUSTERS
Carbon Handguards — Carbon
Lightweight carbon handguards that protect hands and controls. Fits Barkbusters backbones (except EGO) and supports single point mount options.
€135.11
€177.50
BARKBUSTERS
Universal Hardware Kit for 25.4mm Handlebars — 25.4 mm (1"),...
Hardware kit only; mounts to a single point on 25.4mm (1") handlebars. Compatible with STORM or CARBON guards. Not designed for impact protection.
€43.86
€57.60
BARKBUSTERS
Adaptor Kit — 1 in handlebar, handlebar mount, B-074
Adaptor kit for 1 inch handlebars; use with parts 06352237, 06352250 or AERO-GP.
€12.16
€16.00
BARKBUSTERS
Screw Kit — Handguard, Black
Set of 4 screws for fitting JET, EGO, VPS or STORM plastic guards to a Barkbusters backbone.
€1.82
€2.40
BARKBUSTERS
STORM Saddle Kit — Barkbusters, Handguard, Black
Saddle kit with screws — set of 2 for fitting STORM plastic guards to Barkbusters backbones.
€5.80
€7.60
BARKBUSTERS
LED Position Light — White, Black housing, Pair
Set of two white LED position lights, 15 LEDs per light, low power draw, approx. 700mm cable. Fits JET, VPS and STORM plastic guards.
€37.61
€49.40
BARKBUSTERS
Indicator Light Amber LED — Pair, Turn signal
Set of 2 amber LED indicator lights for use as turn indicators. 15 LEDs per light, low power draw, E-mark approved. Cables ~700mm; may require a resistor for correct flash rate.
€37.61
€49.40
DEI
Heat Shield Liner Kit — Stock fit
Precision-cut liner reduces heat transfer and lowers outer shield surface temperatures up to 60%. Easy, non-permanent installation and fully hidden when fitted.
€63.10
€79.35
DEI
Heat Shield Liner Kit — Stock
Precision-cut liner that insulates the outer heat shield, lowers surface temperatures up to 60%, and remains hidden when installed.
€63.10
€79.35
DEI
Heat Shield Liner Kit — Pro Pipes
Insulates and lowers the surface temperature of the outer heat shield; precision-cut for a hidden, no-modification installation. Reduces heat up to 60%.
€63.10
€79.35
DEI
Heat Shield Liner Kit — Outlaw 2-1, Aluminum
Insulates the outer shield to lower surface temperatures and protect nearby components.
€63.10
€79.35
DEI
Heat Shield Liner Kit — Outlaw 2-1
Hidden thermal liner that reduces outer shield temperature up to 60%, precision-cut for an exact fit and simple, non-permanent installation.
€68.18
€85.74
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black
Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).
€12.10
€15.21
DEI
Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black
Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.
€74.05
€93.11
DEI
Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black
Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.
€81.43
€102.40
DEI
Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black
Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.
€108.03
€135.85
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')
Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.
€159.09
€200.05
DEI
Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black
Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.
€51.36
€64.59
DEI
Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black
Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.
€67.57
€84.97
BARKBUSTERS
LED Indicator Resistor — LED-RES-001
10 ohm resistor set (2) to correct LED indicator flash rate. Use only with LED Amber Light – Indicator (0635-2280).
€14.55
€19.10